10 | ASSEMBLY | Your Billy Goat is shipped from the factory in one carton, completely assembled except for the upper |
handle and accessories. Included with machine are caster kit (890447), felt filter bag (1 each), lawn |
liner (3 each), and litter liner (3 each).
Read all safety and operating instructions before assembling or starting this unit.
1. REMOVE items 8 locknut & 74
1.screws from lower handle (item 5.
27). Attach and securely tighten upper handle item 6 to lower handle as shown.
2. REMOVE deflector (item 83)
2.from box. Discard packing material. Remove carriage bolts (item 31) and nut (item 4) from deflector. Install to bag plate (item 13) as shown reusing parts removed (nut should be on side shown).
Failure to attach deflector may result in
premature wear to bag.
3. UNFOLD the debris bag
3.(item 1) position bottom of bag rod below the bag plate and pull up and rotate the top of the bag rod up and secure with the latch.
4. ATTACH bag hanger strap to bag
4.supports (item 11), preassembled to upper handle.
4a. Bag hanger straps are designed for adjustment when more clearance is required between bag and ground. Typically the bottom loop of the strap is used when operating on turf.
SEE ENGINE MANUFACTURER'S
MANUAL (some engine manufac- PUT OIL IN ENGINE tures' have different oil checking
BEFORE STARTING procedures)
6.
7.
6.CONNECT spark plug wire.
7.VERIFY fuel valve on.
Part No. 890049 | Page 4 of 8 | Form No. F100202A |
