USER GUIDE
Solas 1505
Solas 1505 Twin
Solas 1505 Triple
Digital Cordless Telephone
Binatone Helpline (for UK only) Monday to Friday from 9:00am to 5:00pm
Tel: 0845 345 9677
**Please note that all calls are charged at local rate or visit our website: www.binatoneonline.com
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set, please read these instructions carefully.
TECHNICAL DETAILS
Standard | Digital Enhanced Cordless |
| Telecommunication (DECT) |
Frequency range | 1.88 to 1.9 GHz (bandwidth = 20 MHz) |
Channel bandwidth | 1.728 MHz |
Operating range | Up to 300m outdoors; up to 50m indoors |
Operating time | Standby: 100 hours, Talking: 10 hours |
| Battery charge time:15 hours |
Temperature range Operating 0 C to 40 C, Storage | |
Electrical power | Base unit: |
| TenPao - S004LB0600030/S004LV0600030 - |
| input |
Charger unit:
TenPao - S004LB0600030 / S004LV0600030 -
input
Battery Information
GPI - VT40AAAHC 2 x 1.2V AAA size 400mAh NiMH
BYD -
CORUN-
Voltage Rating 400mAh ,2 X 1.2V AAA Size
Caution
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions.
Port specification The port (connected to the mains power supply) is a SELV port with respect to EN41003.
The 
port (connected to the telephone line) is aTNV port with respect to EN41003.
CLEANING AND CARE
Do not clean any part of your phone system with benzene, thinners or other solvent chemicals - this may cause permanent damage which is not covered by the Guarantee.
When necessary, clean it with a damp cloth.
Keep your phone system away from hot, humid conditions or strong sunlight, and don't let it get wet.
Every effort has been made to ensure high standards of reliability for your Solas 1505 system. However, if something does go wrong, please do not try to repair it yourself, consult your supplier or the Helpline.
TABLE OF CONTENTS
1 | IMPORTANT SAFETY INSTRUCTIONS | 3 | |
2 | INSTALLING YOUR PHONE | 5 | |
2.1 | CONNECTING THE BASE STATION | 5 | |
2.2 | INSTALLING AND CHARGING THE BATTERIES | 5 | |
3 GETTING TO KNOW YOUR PHONE | 6 | ||
3.1 | HANDSET OVERVIEW | 6 | |
3.2 | BASE STATION OVERVIEW | 7 | |
3.3 | DISPLAY ICONS AND SYMBOLS | 7 | |
3.4 | MENU STRUCTURE | 8 | |
3.5 | TEXT AND DIGIT ENTRY TABLE | 9 | |
3.5.1 | CHARACTER SET | 9 | |
4 | USING YOUR PHONE | 10 | |
4.1 | MAKE A CALL | 10 | |
4.1.1 | PREPARATORY DIALLING | 10 | |
4.1.2 | DIRECT DIALLING | 10 | |
4.1.3 | CALL FROM THE PHONEBOOK | 10 | |
4.1.4 CALL FROM THE CALL LIST(ONLY AVAILABLE WITH CALLER DISPLAY) | 10 | ||
4.1.5 CALL FROM THE REDIAL LIST | 10 | ||
4.1.6 | CALL TIMER | 10 | |
4.2 | ANSWER A CALL | 10 | |
4.3 | END A CALL | 11 | |
4.4 | ADJUST EARPIECE VOLUME | 11 | |
4.5 | MUTE A CALL | 11 | |
4.6 | TURN OFF HANDSET RINGER | 11 | |
4.7 | TURN ON THE KEYPAD LOCK | 11 | |
4.8 | REDIAL THE LAST NUMBER | 11 | |
4.8.1 REDIAL A NUMBER FROM THE REDIAL LIST | 11 | ||
4.8.2 STORE A REDIAL NUMBER INTO THE PHONEBOOK | 12 | ||
4.8.3 DELETE A REDIAL NUMBER | 12 | ||
4.8.4 | DELETE ALL REDIAL LIST ENTRIES | 12 | |
4.9 | FIND THE HANDSET | 12 | |
4.10 MAKE AN INTERNAL CALL(FOR | 12 | ||
4.10.1 | INTERCOM ANOTHER HANDSET | 13 | |
4.10.2 | CALL ALL HANDSETS | 13 | |
4.10.3 TRANSFER AN EXTERNAL CALL TO ANOTHER HANDSET | 13 | ||
4.10.4 | MAKE A | 13 | |
1
5 | PRIVATE PHONEBOOK | 14 | |
5.1 ADD A NEW PHONEBOOK ENTRY | 14 | ||
5.2 |
| SEARCH FOR A PHONEBOOK ENTRY | 14 |
5.3 |
| VIEW A PHONEBOOK ENTRY | 14 |
5.4 |
| EDIT A PHONEBOOK ENTRY | 15 |
5.5 |
| DELETE A PHONEBOOK ENTRY | 15 |
5.6 |
| DELETEALLPHONEBOOKENTRIES | 15 |
5.7 |
| CHECK THE PHONEBOOK USAGE | 15 |
6 CALLER DISPLAY (NETWORK DEPENDENT) | 16 | ||
6.1 |
| VIEW THE CALL LIST | 16 |
6.2 |
| STORE A CALL LIST NUMBER INTO THE PHONEBOOK | 16 |
6.3 |
| DELETE AN ENTRY IN THE CALL LIST | 17 |
6.4 |
| DELETE ALL CALL LIST ENTRIES | 17 |
7 | PHONE SETTINGS | 18 | |
7.1 |
| DATE AND TIME SETTINGS | 18 |
7.1.1 CHANGE THE DATE FORMAT | 18 | ||
7.1.2 CHANGE THE TIME FORMAT | 18 | ||
7.1.3 | SET THE TIME | 18 | |
7.1.4 | SET THE DATE | 18 | |
7.2 |
| ALARM SETTINGS | 19 |
7.2.1 TURN ON/OFF THE ALARM | 19 | ||
7.2.2 SET THE ALARM TIME | 19 | ||
7.3 |
| HANDSET SETTINGS | 19 |
7.3.1 SET THE RINGER MELODY FOR INTERNAL CALLS | 19 | ||
7.3.2 SET THE RINGER MELODY FOR EXTERNAL CALLS | 20 | ||
7.3.3 SET THE RINGER VOLUME | 20 | ||
7.3.4 | SET ALERT TONES | 20 | |
7.3.5 SET THE HANDSET LANGUAGE | 20 | ||
7.3.6 | RENAME THE HANDSET | 21 | |
7.3.7 CHOOSE THE INFORMATION TO BE DISPLAYED IN IDLE | 21 | ||
7.3.8 SET THE AUTO ANSWER | 21 | ||
7.4 |
| BASE SETTINGS | 21 |
7.4.1 | 21 | ||
7.4.2 CHANGE THE DIAL MODE | 22 | ||
7.4.3 CHANGE THE FLASH (RECALL)TIME | 22 | ||
7.4.4 CHANGE THE SYSTEM PIN CODE | 22 | ||
7.5 |
| REGISTRATION | 23 |
7.6 |
| RESET YOUR PHONE | 23 |
8 | TROUBLESHOOTING | 24 | |
9 | DECLARATION OF CONFORMITY | 25 | |
10 GUARANTEE AND SERVICE | 26 | ||
2
1 IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:
1)Read and understand all the instructions.
2)Follow all warnings and instructions marked on the product.
3)Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4)Keep your phone away from hot, humid conditions or strong sunlight, and don't let it get wet or use this product near water (for example, near a bath tub, kitchen sink, swimming pool).
5)Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
6)Unplug this product from the wall outlet and refer servicing to our Repair Centre under the following conditions:
•When the power supply cord or plug is damaged or frayed.
•If the product does not operate normally by following the operating instructions.
•If the product has been dropped and the cabinet has been damaged.
•If the product exhibits a distinct change in performance.
7)NEVER use your phone outdoors during a
8)Do not use the telephone to report a gas leak in the vicinity of the leak.
9)Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only applicable with the default battery capacities
10)The use of other battery types or
11)Do not use third party charging bays. Damage may be caused to the batteries.
12)Please ensure the batteries are inserted in the correct polarity.
13)Dispose of batteries safely. Do not immerse them in water, burn them, or put them where they could get punctured.
3
Package contents
The package contains the following items:
•1 Handset
•1 Base station
•1 Mains power adapter
•1 Telephone line cord
•2 AAA rechargeable batteries
•1 User manual
Note: If you have a Twin, Triple or Quad system, you will also have the requisite extra handset(s) and batteries, and a charger pod for each extra handset.
Connection and Conditions for use:
You can connect your phone to a direct exchange line (DEL) on a local exchange with its own phone number; to an extension socket connected to a DEL; or to an extension on an approved compatible PBX. Do not connect as an extension to a payphone.
The ringer equivalence number (REN) of all equipment (phones, fax machines, modems, etc.) connected to an exchange line must not add up to more than 4, otherwise one or more of them may not ring and/or answer calls correctly. This phone has a REN of 1, and most other elephones have a REN of 1 unless marked otherwise.
Handset - Base Connection
1)When purchased, all handsets are already registered to the base unit and should link to it when they are all powered up.
2)To use your cordless handset and base unit together, you must be able to establish a radio link between them. The signal between the handset and the base is in accordance with the normal standards for a DECT phone: Maximun range up to 300 metres outdoors or 50 metres indoors. Be aware that:
> Any large metal object, such as a refrigerator, mirror or filing cabinet, between the handset and the base unit may block the radio signal.
> Other solid structures, like walls, may reduce the signal strength.
> Other electrical equipment may cause interference and/or affect the range.
3)Do not place close to another telephone, a TV or audio equipment - it may cause interference.
4)Out of Range warning. If you hear a warning tone during a call, and/or the sound in the earpiece becomes faint or distorted, you may be going out of range of the base unit, so move nearer to the base unit within 20 seconds, otherwise the call may be cut off.
4
2 INSTALLING YOUR PHONE
2.1Connecting the base station
1) Plug the power supply 
and line cord 
into the base station.
2)Plug the power adapter into a 230Vac,
50Hz mains socket, and the line cord into your telephone line socket.
3)Always use the cables provided in the box
Warning: Use only the provided adaptor, using other power supplies may cause a hazard. Warning: Install the base unit in a position where
the mains adapter plug will reach an easily accessible mains socket. Never try to lengthen the mains power cable.
Note: The base unit needs mains power for normal operation, not just for charging the handset batteries.
2.2Installing and charging the batteries
1)Place the 2 supplied batteries into the battery compartment with the polarity markings as shown
Use only the NiMH rechargeable battery type provided.
2)Position the battery compartment cover over the
batteries and slide up to click into place.
3)Put the handset on the base and charge for
15 hours before using the handset for the first time.
The handset will give a beep when it is properly placed on the base or charger.
If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you will need to insert a
In a home with broadband, every telephone must have a
If you need more broadband
3GETTING TO KNOW YOUR PHONE
3.1Handset Overview
1 UP 
From idle: access the Call List
In lists: move up the options
During calls / ringing: increase the volume.
2 LEFT SOFT KEY( | /OK) |
|
| |
Use with icons on display above, to |
|
| ||
open menu and confirm options. | 1 |
| ||
3 TALK ON |
|
| ||
|
|
| ||
Make or answer calls |
|
|
| |
4 DOWN |
|
|
| |
In lists: move down the options | 2 | 6 | ||
During calls / ringing: decrease the | ||||
volume |
| 3 | 7 | |
5 SPEAKERPHONE ( | ) | |||
During a call: Press to turn on / off the | 4 |
| ||
speakerphone. |
|
|
| |
Call List / Phonebook entry : Press to |
|
| ||
make a call with speakerphone |
|
| ||
During ringing: Press to answer a call |
|
| ||
with speakerphone |
|
|
| |
During answering machine message |
|
| ||
playback / call screening: | 5 | 8 | ||
Press to play message via speaker | ||||
|
| |||
6 RIGHT SOFT KEY 
(CLEAR/BACK/MUTE/INTERCOM)
Use with icons on display above, to clear characters, go back to previous
menu, mute the microphone or make an intercom call.
7 TALK OFF 
End a call or return to previous menu.
Press and hold to turn the handset on / off.
8 R - RECALL (also called Flash)
Sends a recall (R) signal, used for some PBX / Calling Features.
3.2 Base Station Overview | 1 |
1.PAGE < 
>
Press the Page button on the base station to page your handset(s).
It will ring for approximately 60 seconds. | 2 |
|
Press and hold to put base into registration mode.
2. CHARGING CRADLE
3.3 Display Icons and Symbols
The LCD display gives you information on the current status of the telephone.
Indicates you can scroll up / down the menu items / Phonebook list / Redial list / Call List
Steady when the handset is in range of the base. Flashes when out of range of the base or not registered to the base.
Steady when an intercom call is in progress. Flashes when there is an incoming internal call.
Indicates a call is in progress on that handset. Flashes when there is an incoming external call.
Indicates that the handset ringer is switched off.
Steady when an alarm is set. Flashes when the alarm is sounding.
Indicates that the keypad is locked.
Indicates when you have a new Voice Mail message.
(This is a Caller Display service and is not usually available from UK network providers.)
Indicates when the battery is fully charged.
Whole icon flashes when the battery is charging.
Internal block icon flashes when the battery is in final charging stage.
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
Indicates when there are more characters or numbers in front of those being displayed.
Indicates when there are more characters or numbers after those being displayed.
Press the MENU/OK key to access the main menu.
Press the MENU/OK key to confirm the current selection. Indicates a new Call List entry is being displayed.
Press the C/MUTE key to start an intercom call.
(INT)
Press the C/MUTE key to go back to the previous menu level or cancel (BACK) the current action.
Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute the microphone during a call.
3.4Menu Structure
In idle mode, press <MENU/OK> to go to CALL LIST, the first option in the menu list.
Press <UP> or <DOWN> to go to other options in the menu list. Press <MENU/OK> to enter a
Press <C/MUTE> to go back to the previous level.
Refer to the following for the menu structure.
<UP/DOWN>
Key Press | <MENU> |
| <UP/ |
| <UP/ |
| <UP/ |
| <UP/ |
| <UP/ | |
| DOWN> |
| DOWN> |
| DOWN> |
| DOWN> |
| DOWN> | |||
Main |
| CALL LIST |
| PHONEBOOK |
| BS |
| HS |
| REGISTRATION |
| DEFAULT |
|
|
|
|
|
| |||||||
Menu |
|
|
|
|
| SETTINGS |
| SETTINGS |
|
|
|
|
Sub |
| Shows EMPTY |
| Shows EMPTY |
| DELETE HS |
| ALARM |
| PIN? - - - - |
| PIN? - - - - |
menu |
| or the first Call |
| or the first |
| DIAL MODE |
| RING SETUP |
|
|
|
|
|
| List Entry. Then |
| phonebook Entry. |
| FLASH TIME |
| TONE SETUP |
|
|
|
|
|
| <OK> for: |
| Then <OK> for: |
| CHANGE PIN |
| LANGUAGE |
|
|
|
|
|
| ADD TO PB |
| ADD |
|
|
| RENAME HS |
|
|
|
|
|
| DELETE |
| PB STATUS |
|
|
| HS DISPLAY |
|
|
|
|
|
| DELETE ALL |
| or |
|
|
| AUTO ANSWER |
|
|
|
|
|
| DETAILS |
| ADD |
|
|
| DATE & TIME |
|
|
|
|
|
|
|
| VIEW |
|
|
|
|
|
|
|
|
|
|
|
| EDIT |
|
|
|
|
|
|
|
|
|
|
|
| DELETE |
|
|
|
|
|
|
|
|
|
|
|
| DELETE ALL |
|
|
|
|
|
|
|
|
|
|
|
| PB STATUS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.5Text and Digit Entry Table
The following table shows you where each letter and punctuation character can be found, by using repeated presses of the alphanumeric keypad. This will be helpful when storing a name in the phonebook and renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned at the right of the last character entered.
Writing Tips:
1.Once a character is selected, the cursor will move to the next position after a short pause.
2.You can move the cursor within the text with the <UP/DOWN> keys to amend the text entry.
3.Press <C> to delete the last character.
4.Press and hold <C> to delete the entire text string.
3.5.1Character Set
|
|
| Alphanumeric Editing | Number Editing (For phone | |||||||
| (For phonebook name editing and renaming handset) | number editing,date/time editing) | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Key Press | 1st | 2nd | 3rd | 4th | 5th | 6th | 7th | 8th | 9th | 10th |
|
1 | space | - | 1 |
|
|
|
|
|
|
| 1 |
2 | A | B | C | 2 |
|
|
|
|
|
| 2 |
3 | D | E | F | 3 |
|
|
|
|
|
| 3 |
4 | G | H | I | 4 |
|
|
|
|
|
| 4 |
5 | J | K | L | 5 |
|
|
|
|
|
| 5 |
6 | M | N | O | 6 |
|
|
|
|
|
| 6 |
7 | P | Q | R | S | 7 |
|
|
|
|
| 7 |
8 | T | U | V | 8 |
|
|
|
|
|
| 8 |
9 | W | X | Y | Z | 9 |
|
|
|
|
| 9 |
0 | Ø |
|
|
|
|
|
|
|
|
| 0, or P (Pause) if press and hold |
* | * | ? | / | \ | ( | ) |
|
|
|
| * |
# | o | ' | , | - | , | & |
|
|
|
| # |
Note: There are some different characters if the handset language is changed (page 20).
4 USING YOUR PHONE
4.1Make a Call
4.1.1Preparatory Dialling
Enter the phone number and press <TALK ON> to connect to the line and to dial the number. When entering the number, if you make a mistake, press <C> to delete digits.
4.1.2Direct Dialling
Press <TALK ON> to connect to the line and then enter the phone number. (Note: if you enter a wrong digit you cannot correct it with the <C> key.)
4.1.3Call from the phonebook
Press <MENU/OK>, then <DOWN>, then <MENU/OK> again to access the phonebook and press <UP/DOWN> to select the desired phonebook entry. Press <TALK ON> to dial out the selected phonebook entry.
Note: The alphanumeric keys provide a
4.1.4Call from the Call List (only available with Caller Display)
Press <UP> to access the Call List and press <UP/DOWN> to select the desired Call List entry.
Press <TALK ON> to dial out the selected Call List entry.
Note: You can also access the Call List by pressing <MENU/OK> twice.
4.1.5Call from the redial list
Press <DOWN> to access the redial list and press <UP/DOWN> to select the desired redial number.
Press <TALK ON> to dial out the selected redial number.
4.1.6Call timer
Your handset automatically times the duration of every call.
The call timer is displayed as soon as you answer a call or 15 seconds after dialling and remains on the screen for 5 seconds after the end of the call.
It is shown in hours, minutes and seconds format (HH:MM:SS).
4.2Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press <TALK ON> to answer a call.
Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or charger will answer the call automatically, and no buttons need to be pressed.
5
6
7
8
9 | 10 |
4.3End a Call
During a call press <TALK OFF> to end the call.
OR
Put the handset on the base station or charger to end the call.
4.4Adjust Earpiece Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece volume.
During a call:
Press <UP/DOWN> to select volume
4.5Mute a Call
You can talk to someone nearby without letting the caller hear you during a call. During a call:
Press <C> to mute the microphone and “MUTED” will display on the LCD. Your caller cannot hear you. Press <C> again to unmute the microphone.
4.6Turn off the Handset Ringer
In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER OFF” icon is displayed on the LCD.
Note: The display will still flash the Call icon and show CALL or the Caller Display number, when there is an incoming call, even if the ringer is turned off To turn the ringer back on, press and hold <HASH/#> again.
4.7Turn on the Keypad Lock
In idle, press and hold <STAR/*> to turn on the keypad lock. The LOCK” icon is displayed on the LCD.
Note: You can still use <TALK ON> to answer a call when the handset is ringing. To turn the keypad lock off, press and hold <STAR/*> again.
4.8Redial the last number
You can redial any of the 5 last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead. The most recent last number will display at the top of the redial list.
4.8.1Redial a Number from the Redial List
1.Press <REDIAL> to access the redial list.
Note: If the redial list entry shows a name, press <Hash/#> to view the number of this entry.
2.Press <UP/DOWN> to browse the redial list.
3.Press <TALK ON> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows “EMPTY ”.
11
4.8.2Store a Redial Number into the Phonebook
1.Follow Steps 1 and 2 in section 4.8.1.
2.Press <MENU> and <UP/DOWN> to select ADD TO PB.
3.Press <OK> and then enter the name you want to use in the phonebook.
4.Press <OK> and then modify the number, if necessary.
5.Press <OK> to show <MELODY 1>.
6.Press <UP/DOWN> to browse the ringtone list. The respective ringtone will be played when browsing the ringtone list. (Note: the selected melody will only be played if you subscribe to Caller Display and the incoming number matches the stored number.)
7.Press <OK> to confirm, and the entry will be stored.
4.8.3Delete a Redial Number
1.Follow Steps 1 and 2 in section 4.8.1.
2.Press <MENU> and <UP/DOWN> to select DELETE.
3.Press <OK> to confirm, and the entry will be deleted.
4.8.4Delete all Redial List entries
1. Follow Steps 1 and 2 in section 4.8.1.
2.Press <MENU> and <UP/DOWN> to select DELETE ALL
3.Press <OK> to display <CONFIRM?>.
4.Press <OK> to confirm. All entries will be deleted and the display will show <EMPTY>.
4.9Find the Handset
You can locate the handset by pressing <PAGE> on the base station. All the handsets registered to the base will produce the paging tone and show "PAGING" on the display. You can stop the paging by pressing <TALKON>/ <TALK OFF> /<C> on any handset or <PAGE> on the base again.
Note: If there is an incoming call during paging, the phone will ring with the incoming call instead of paging.
4.10 Make an Internal Call (For
This feature is only applicable when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to another handset and make conference calls. If the called handset is not answered within 60 seconds, the called handset will stop ringing and the calling handset will return to standby mode.
Note: If only one handset is registered to the base station, when <C/MUTE/INT> is pressed, it will display “NOT POSSIBLE”
12
4.10.1 Intercom Another Handset
1.In idle mode, press <C/MUTE/INT> and all the other registered handset numbers will display, along with a "9".
2.Enter the number of the handset that you want to call, or enter "9" to call all handsets.
3.The called handset rings and <TALK ON> must be pressed on that handset to establish the intercom call.
Note: If only two handsets are registered to the base station, pressing <C/MUTE/INT> will call the other handset immediately.
Note: If there is an external call while you are on an intercom call, you'll hear warning beeps, and you have to end the intercom call, before you can answer the external call.
4.10.2Call All Handsets
1.In idle mode, press <C/MUTE/INT> and the registered handsets will display.
2.Press digit key <9> to ring to all registered handsets
4.10.3Transfer an External Call to another handset During an external call:
1. Press <MENU> and <UP/DOWN> to select INTERCOM.
2. Press <OK> to show all the other registered handset numbers, plus "9". Enter the number for the handset you want to transfer the call to.
3. The external call is put on hold automatically and the called handset rings.
4. Press <TALK ON> on the called handset to establish an internal call.
5. Press <TALK OFF> on the calling handset or put the calling handset on the charging cradle to end the current call with the external party.
6. The external call is transferred to the called handset.
Note: If the other handset has not answered the intercom call, you can stop the intercom and return to the external call by pressing <TALK OFF>
4.10.4Make a
The conference call feature allows one external call to be shared with two handsets (in intercom).
The three parties can share the conversation and no additional network subscription is required.
During an external call:
1.Follow Steps 1 to 4 in section 4.10.3.
2.Press and hold <STAR> on the calling handset to establish the conference call
Either handset can exit the conference by pressing <TALK OFF>, leaving the other handset still connected to the external call.
13
5 PRIVATE PHONEBOOK
Each handset can store up to 20 private phonebook entries with names and numbers. Each phonebook entry can have a maximum of 20 digits for the phone number and 12 characters for the name. You can also select different ringtones for your phonebook entries. (Note: the different ringtones only play if you subscribe to Caller Display and the incoming number matches the stored number.) Phonebook entries are stored alphabetically by name.
5.1Add a New Phonebook Entry
In idle:
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook.
2. Press <MENU> to show ADD.
3. Press <OK> and then enter the name.
4. Press <OK> and then enter the number.
5. Press <OK> and <UP/DOWN> to select the desired ringtone for your phonebook entry.
6. Press <OK> to store the phonebook entry.
5.2Search for a Phonebook Entry
In idle:
1.Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook.
2.Enter the first letter of the name using the alphanumeric keys(e.g. if it begins with C, press the 2 key three times),
and then <UP/DOWN> to scroll to the entry you want.
5.3View a Phonebook Entry In idle:
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select VIEW.
4. Press <OK> and <UP/DOWN> to review the name, number and ringtone of the selected phonebook entry.
Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or <RIGHT SOFT KEY> to view the remaining digits.
14
5.4Edit a Phonebook Entry In idle:
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select EDIT.
4. Press <OK> to display the current name.
5. Edit the name and press <OK>.
6. Edit the number and press <OK>.
7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm.
5.5Delete a Phonebook Entry
In idle:
1.Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook.
2.Press <UP/DOWN> to select the desired phonebook entry.
3.Press <MENU> and <UP/DOWN> to select DELETE.
4.Press <OK> to confirm, and the entry will be deleted.
5.6Delete all Phonebook entries
1.Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook.
2.Press <MENU> and <UP/DOWN> to select DELETE ALL.
3.Press <OK> to display <CONFIRM?>.
4.Press <OK> to confirm. All entries will be deleted and the display will show <EMPTY>.
5.7Check the Phonebook Usage
You can check how many phonebook entries are stored in your handset and how many phonebook entries are available for you to store in the phonebook.
1.Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook.
2.Press <MENU> and <UP/DOWN> to select PB STATUS.
3.Press <OK> to display how much of the phonebook is being used, for example < 6/ 20 USED> means 6 entries are stored out of the total 20 available spaces.
15
6 CALLER DISPLAY (NETWORK DEPENDENT)
This feature is available if you have subscribed to the Calling Line Identification service with your network service provider. Your phone can store up to 10 received calls with date/time information in the Call List. The number will be shown on the handset display when the phone is ringing. If the number matches with one of the entries in your Private Phonebook, the caller’s name stored in the private phonebook will be displayed alternately with the number, and the handset will ring with the ringtone associated with that phonebook entry.
If the call is from someone who withheld their number, e.g. by dialling 141, “WITHHELD” will display.
If the call is from someone whose number is unavailable, e.g. an international call or from a private exchange, “OUT OF AREA” will display.
If you've got new Caller Display records, the handset will display "X NEW CALLS" in standby mode. The New Calls indication will remain until all the new call records have been viewed on that handset.
6.1View the Call List
All received calls are saved in the Call List, with the latest call at the top of the list. When the call list is full, the oldest call will be replaced by a new call. Any unanswered calls which have not been viewed are marked with a <*> icon at the centre of the bottom line of the display.
1. Press <UP> to access the call list.
OR Press <MENU> and <UP/DOWN> to show CALL LIST, then press OK.
2.Press <UP/DOWN> to select the desired entry.
3.Press <#> to view the caller’s number if applicable.
4.Press <MENU>, <UP/DOWN> to show DETAILS, and then <OK> to display the date and time of the call. Press <OK> to go back to the previous screen.
6.2Store a Call List Number into the Phonebook
1.Follow Steps 1 and 2 in Section 6.1.
2.Press <MENU> and <UP/DOWN> to show ADD TO PB.
3.Press <OK> and then enter the name.
4.Press <OK> and the selected call list number is displayed.
5.Edit the number if necessary.
6.Press <OK> and <UP/DOWN> to select the ringtone.
7.Press <OK> to store the phonebook entry and return to the calls list.
16
