Color profile: Generic CMYK printer profile
Composite Default screen
Customise your phone system
PIN code
1
2
3
4
5
Dial mode
1
2
This is the system PIN
The default PIN is 0000; you can change it to any
Press the MENU then the ▲ or ▼ button to go
to BASE
Press the PHONE/OK button twice
The display shows PINCODE. If the current PIN is still at default 0000, it will skip this input.
Key in the current PIN and confirm using
PHONE/OK button
The display showsNEWPIN
Key in the new PIN and confirm using
PHONE/OK button
The display shows NEWPin
Key in the new PIN again and confirm using
PHONE/OK button
The PIN code is changed after ‘beep’.
(If you key in a wrong PIN code on step, the display will exit the setting, you have to repeat above steps.)
You should normally leave the this setting at TONE, but if you use the phone as an extension on a PBX, you may need to change to PULSE.
Press the MENU button, then the ▲ or ▼ button to go to BASE
Press the PHONE/OK button then ▲ or ▼ button to dial mode
http://www.binatoneonline.com/ | 39 |