Set Flash
Time
1
2
3
This telephone gives you the possibility to use the special services services of your network provider.
When pressing the RECALL button, the phone generates a line interruption and the length depends on your Flash Time setting.
In standby mode, press SET/STO button.
ÖThe display shows ' SET 1 DATE '.
Press UP or DOWN button until the display shows 'SET 3 FLASH'.
Press SET/STO to confirm.
Storing a | 1 | In standby mode, Key in the telephone number you |
Number in |
| wish to stored. |
M1,M2,M3 |
| Ö Up to a maximum 16 digits. |
memorys | 2 | Press SET/STO button. |
| ||
| 3 | 2 Press M1.M2,M3 button to stored. |
|
| 3 |
This product is guaranteed against manufacturing defects for a period of 1 Year.
This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use.
In the event of a problem with the product within the guarantee period please return it to your nearest Argos store.
If the item is shown to have had an inherent defect present at the time of sale, the store will
4
Press UP or DOWN button to select 100 (default),300, 600, or 1000.
Dial out | 2 |
Stored |
|
number | 3 |
Lift up Handset or press the SPEAKERPHONE button,
press M1,M2,M3 buttons.
provide you with a replacement.
Your statutory rights remain unaffected.
5 | Press SET/STO button to confirm the setting. |
ÖThe display shows ' SET 1 DATE ' , you can continue with programming, or press DELETE button to return to standby mode.
5.Telephone Operations
Storing a | 1 |
|
|
|
Number in |
|
|
|
|
2 |
|
|
| |
|
|
| ||
memorys | 3 |
|
|
|
|
|
| ||
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
In standby mode, Key in the telephone number you wish to stored.
ÖUp to a maximum 16 digits.
Press SET/STO button.
Press the
Guarantor; Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW8. Technical details
Standard Spirit 410 Telephone
Making a 1 call
2
3
To answer a call
Lift the Handset, listen for a dial tone.
ÖThe display shows '
Dial the telephone number you wish to call.
ÖThe display shows the number as you dial(maximum of 14 digits will be shown).
To end the call, return the Handset to the Base unit.
When the phone rings;
Lift the handset or press the SPEAKERPHONE button on the Base unit.
Ö The Call timer starts about 7 seconds after going on line.
selected memory.
Dial out | 1 | Pd Y^Va V cjbWZg hidgZY ^c Pld1idjX] bZbdgn .41=/ | |
Stored |
| C | s1.< =8 <0- |
number | 2 | C | *=<<76 |
| |||
| C | ||
| |||
memorys |
| Ö The number dials automatically. | |
6. Caller Display Operation
Temperature range Operating 0 ºC to 40 ºC Storage
PBX compatibility Timed break recall: 98 ms. Pause length: 3.6 seconds.
Signalling type: DTMF
Network connection This equipment is intended to be used in the UK only.
Operation on other countries’ PSTN termination points cannot be guaranteed.
Declaration of conformity
The Binatone Spirit 410 phone complies with the essential protective requirements and objectives of:
EC R&TTE Directive 1999/5/EC | EC Low Voltage Directive 2006/95/EC |
To adjust the speakerphone volume
To end a call
To switch between the Handset and the Speakerphone
During a call;
Adjust the volume of the speakerphone to your comfortable volume level using the SPEAKERPHONE volume switch located at
the right side of the Base unit.
Replace the Handset on the Base unit cradle or press the SPEAKERPHONE button on the Base unit.
ÖThe SPEAKERPHONE light indicator will turn OFF.
During a phone conversation through the Handset, press the SPEAKERPHONE button to speak
The Speakerphone light will turn on, but conbrtdsyion remains through the Handset until the Handset is speakerphone replaced on the Base unit cradle. while in speakerphone mode, lift the Handset to enable a private conversation.
VERY IMPORTANT:
To use Caller Display you must first subscribe to your network provider's Caller Diaply service. If you subscribe to a Caller Display service, you can see the phone number of the person calling you before you answer. The caller display information
includes: |
| The date and time of the call |
The caller's number | | |
|
|
|
Condition of Incoming Caller Information |
| LCD Screen will display |
It is a duplicate one |
| REP |
It is a new one |
| NEW |
It has exceeded the range of the service |
| UNAVAILABLE |
It is a secret one |
| WITHHELD |
It may not be nicety for the reason of outside | ERROR | |
There is a voice information in your mailbox (This function is available only when you have
EC EMC Directive 89/336/EEC |
and conforms to the following relevant harmonized standards:
| Network: TBR37, TBR38 | Waste electrical products must not bedisposed | |
| EMC: EN 55022, EN 55024 | of with household waste. | |
| Safety: EN 60950 | This equipment should be taken to your local | |
recycling centre for safe treatment. | |||
|
|
Binatone operates a policy of continuous product improvement, and so reserves the right to make changes to the product and functions without notice.
Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
Connection and conditions for use
You can connect your Spirit 410e phone to a direct exchange line (DEL) - a line connected to a local exchange, with its own phone number; to an extension
Telphone Operation continue...
Last | 1 | Lift the Handset or press the SPEAKERPHONE button on |
Number |
| the Base unit. |
Redial | 2 | Press LNR button. |
|
| Ö The phone automatically dials the last number you called |
|
| (maximum of 32 digits). |
applied for this service from your telecommunication network)
Caller Display list
Spirit 410 dynamically stores up to 30 groups (12digits) incoming information.
If a call is received when the Call list is full, then the new entry will replace the oldest one.
socket connected to a DEL; or to an extension on an approved compatible PBX. Do not connect the Spirit 410 phone as an extension to a pay phone.
The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.) connected to an exchange line must not add up to more than 4 - otherwise, one or more of them may not ring and/or answer calls correctly.
The Spirit 410 phone has a REN of 1, and most other telephones have a REN of 1
Viewing the 1
In standby mode, press UP or DOWN Dutton.
unless marked otherwise.
Mute 1 Function
2
Inserting a
Pause in
the dialing
sequence 1
2
Use on PBX
During a call press MUTE 
button.
ÖWhen the mouthpiece is muted, the person at the other end of the call cannot hear you but you can hear his side.
To get back to the call, press MUTE 
button again to release.
For some switchboard system, an access number must be dialed (usually an 8 or 9) to get another dial tone and an outside line.
Pressing PAUSE button immediately after the access number, a pause of about 3.6 seconds will be entered, and the desired number can be dialed immediately.
Press PAUSE button to insert a pause when dialing or storing Long Distance Access Codes.
If you are using your Spirit 410 phone on a PBX, and the PBX user guide tells you to press RECALL;
Press R (RECALL) button on your Spirit 410 phone.
Caller
Display list
2
To return a call
To delete Caller Display record
ÖThe display shows the most recent record.
If there are no Caller Display records, the display will show
' 00 CALL'
Press UP or DOWN again to scroll to the next Caller Display record.
When the Caller Display record is displayed.
Lift the handset or press the SPEAKERPHONE button on the Base unit.
ÖThe phone automatically dials out the displayed record.
When the Caller Display record is displayed.
Press DELETE button will delete the Caller Display record.
ÖThe display shows the next Caller Display record.
Press and hold DELETE button 3 seconds, all the Caller Display records will be deleted.
Ö The display automatically return to standby mode.
Contents of this User Guide
1. | Where to find it | If you need help … | |
2 . | Installation | ||
The Binatone Help Line is | |||
3 . | Wall mount installation | ||
4 . | Setting up your phone | available from 9.00 am to | |
5 . | Telephone operation | 5.00 pm, Monday to Friday, on | |
6 . | Caller display operation | 0845 345 9677 | |
7 . | Guarantee and service | Calls are charged at Local Call | |
8 . | Technical details | ||
rate. | |||
|
|
Pressing buttons on your phone
When the instructions in this user guide tell you simply to ‘press’ a button, this means that you should press the button briefly, then release it.
When the instructions tell you to ‘press and hold’ a button, this means you should keep the button pressed until the display changes and/or you hear a tone.
UK Argos Ver2 Jan 2008
