TT125 Flexible Gooseneck Seat Bolt or Floor Mount for TomTom® GPS
15” Flexible Floor Mount
APTTSE
Adapter Plate for TomTom Start™ & Ease™
Check Compatibility
APTTGO520 Adapter plate for TomTom GO x20, x30
Check Compatibility
APTTO
Adapter plate for
TomTom ONE
Check Compatibility
APTTOXL Adapter plate for TomTom ONE XL and XL • S
Check Compatibility
APTTEP Adapter Plate for EasyPort™
Check Compatibility
Package Contents:
(1)
(4)Plastic Caps, and (1) Flexible Steel Shaft with Plastic Tubing
(1)APTTO - Adapter plate for TomTom ONE™ Series
(1)APTTOXL - Adapter plate for TomTom ONE XL™ and XL • S™ Series
(1)APTTGO520 - Adapter plate for TomTom GO™ Series
(1)APTTEP - Adapter plate for TomTom EasyPort pattern
(1)APTTSE - Adapter plate for TomTom Start™ and Ease™
Required Tools for Installation:
1.Socket wrench
2.Drill and screwdriver for optional floor or console mounting
TomTom Device Compatibility:
TomTom ONE 125
TomTom XL 335 Series (TomTom EasyPort Mount)
TomTom XL 340, XL
TomTom XXL
TomTom ONE XL (1st Edition) - TomTom ONE
TomTom ONE UK / EUROPE (NEW Edition aka 2nd Edition, 3rd Edition) TomTom GO 520 / 530 / 630 / 720 / 730 / 920 / 920T / 930
TomTom Start and Ease
TomTom, ONE, GO, and EasyPort, Start and Ease are product names, trademarks, or registered trademarks of TomTom International NV. Arkon Resources, Inc. is not affiliated with TomTom International NV.
1Passenger Seat Bolt Mounting
For a simple mount that can be easily moved to another vehicle, install using the passenger seat track bolt.
!Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road.
Step 1. Screw the flexible steel shaft into the seat track bolt bracket.
Step 2. With a socket wrench, loosen the passenger seat track bolt, in- sert the seat track bolt bracket, and retighten the seat track bolt.
2Floor or Console Mounting
For a more permanent mount, connect the Floor / Console Mount Bracket to the floor or console. This will require drilling into your vehicle’s interior surface.
!Drilling into the dash, floor, or console will permanently damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into the gas tank, electrical system or other highly sensitive vehicle components.
Continued on next column...
Step 1. Position the Floor/Console Bracket and drill into the floor or console.
Step 2. Attach the Floor / Console Bracket with screws and cover with plastic caps.
Step 3. Screw the steel shaft into the Floor / Console Bracket.
Console Mount
Floor Mount
3Pedestal Head Adjustments
Step 1. Adjust the steel shaft by bending with both hands to the desired location of the male dual T head.
Step 2. Use the adjustment knob and wing nut on the pedestal head to swivel or rotate the head position if necessary.
Continued on other side...
!Safety Precautions
Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsi- bility of liability for injury or death as a result of car crashes and / or air bag deployment.
Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount.
| The Mobile Mounting Specialists™ | |
Consumer Hotline: | www.arkon.com | |
USA | (800) | Arcadia, CA 91006 USA |
INT’L | (626) | Designed in USA Made in China and Taiwan |
Monday - Friday 9 am - 5 pm, PST | © Copyright 2010 Arkon Resources, Inc. | |
