HEATER SERVICE INSTRUCTIONS
1.Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.
2.If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty.
3.For service information please call
4.∀If you have any other questions or comments,
feel free to write to us:
The Holmes Group, Inc.
Consumer Service Department
32B Spur Drive
El Paso, TX 79906
than the rating of the heater. Care must be taken to arrange the extension cord where it cannot be pulled on by children or accidentally tripped over.
AUTO SHUT-OFF
To prevent damage and risks due to overheating this unit is equipped with a
It cuts off the power as soon as the heater’s internal temperature becomes too hot. This patented, technologically advanced system requires the user to reset the heater if there is a potential overheat situation. It will only resume operation when the user resets it.
To Reset the Heater:
1.Unplug the heater and wait 10 minutes for the unit to cool down.
2.After the 10 minutes, plug the unit in again and operate normally.
3.Push power button on, set Mode to desired setting.
PRE-OPERATING INSTRUCTIONS
Carefully unpack your heater from the box (it is recommended to save the box for
OPERATING INSTRUCTIONS
Heat | Control |
Exhaust | Panel |
1.Place the unit on a firm level surface. Plug in the heater to a 120V power source.
2.To start the unit, press the mode button. The POWER light will remain lit while the heater is in operation.
Air
Intake
Fig. 1
Oscillation Base | (BFH3416 only) |
6 | 3 |
