Note that the degree range is from 60°F - 85°F (15°C - 29°C). if you scroll past 85°F (29°C) the display will automatically loop to 60°F (15°C).
NOTE: When the room temperature goes below the set temperature the heater will automatically turn off. The fan will continue to run, cooling the heater for 30 seconds. The unit will now operate when the room temperature falls below the preset temperature.
☛TIP: It is normal for the heater to cycle ON and OFF as it maintains the present temperature. To prevent the unit from cycling, raise the thermostat setting.
OSCILLATION (For model BFH3420 only)
For maximum heat distribution use the oscillation function.
1.Press the Oscillation button on the control panel to begin 90° oscillation.
2.To stop the heater from oscillating, press the Oscillation button a second time; the unit will stop in that direction. To resume oscillation, press the Oscillation button again.
NIGHTLIGHT (For BFH3410 and BFH3420 only)
1.The nightlight will automatically light when the room becomes dark. When the room becomes light, the nightlight will automatically turn off.
2.To turn the nightlight off, press the button on the control panel.
☛TIP: The nightlight will not automatically operate until the button is pressed again.
MAINTENANCE INSTRUCTIONS
During Season Care
Before cleaning make sure the unit is unplugged.
1.Allow the heater to cool before cleaning.
2.Carefully wipe the unit with a soft, damp cloth.
☛TIP: Over time, dust may accumulate on the front grills. This can be removed by wiping the unit with a damp cloth. Always unplug unit and allow to cool prior to cleaning.
5
