Bionaire BMD100 English, Safety Precaution, Pre-Operatinginstructions, Operating Instructions

Models: BMD100

1 8
Download 8 pages 59.34 Kb
Page 3
Image 3
ENGLISH

ENGLISH

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS. With proper care and use, this Bionaire dehumidifier will give you fresh, clean air for many years.

NOTE: Before reading these instructions, please unfold the back page for the corresponding illustrations.

DESCRIPTIONS (SEE Figure 1) This product includes unit with tank, instruction manual, and adaptor.

A. ON/OFF Switch (see fig,1) B. LED Display (see fig,2) C. Power Indicator (see fig,2) D. Full Indicator (see fig,2)

NOTE

1. This model works within ambient temperature of 5 ˚C to 35 ˚C.

2. Do not cover the air intake (back) or the air outlet (top).

3. Empty water reservoir when FULL light illuminates.

4. In order to avoid danger, the unit must be far away from heat, explosive gas, plenty of dust and chemical environment.

SAFETY PRECAUTION

Carefully read and retain all instructions before using the dehumidifier.

• To avoid fire or shock hazard, check that the voltage on the product corresponds to your electricity supply and plug directly into an electrical outlet.

• To avoid fire hazard, never put the cord under rugs, or near any heat source.

• Carefully discard any plastic wrapping that was used for the packaging.

• Do not use the dehumidifier outside.

• Do not place the unit near any heat source or in direct sunlight.

• Always unplug the dehumidifier before removing the grill, cleaning the dehumidifier or whenever it is not in use.

• Do not use in or around water or any other liquids. Do not attempt to wash the unit under running water.

• Use appliance only for intended household use as described in this manual.

• Ensure that all air openings are not restricted or covered in any way.

• Do not place anything on top of the unit.

2

Never insert any object into any openings.

Do not use the dehumidifier if any part is missing or damaged in any way.

Do not attempt to repair or adjust any mechanical functions of this unit. If the unit becomes damaged return to the place of purchase or phone the helpline number on the back of this leaflet.

The appliance intended only for indoor use

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person.

In the event of a momentary electrical disturbance , the sample may malfunction and require user to reset the sample.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

HOW THE MINI HUMIDIFIER WORKS Your Bionaire™ Mini dehumidifier draws moisture laden air through the intake grill on the back of the appliance. Humidity passes through refrigerated coils where the moisture is removed and collected in the water reservoir.

PRE-OPERATING INSTRUCTIONS

1. Select a location for your dehumidifier, on a flat/level surface, about 10 cm away from the wall.

2. For 120 volt countries :

Plug the power cord into a 110-120V AC electrical outlet.

For 220 volt countries:

Plug the power cord into a 220-240 AC electrical outlet.

OPERATING INSTRUCTIONS

1. Please use provided AC Adaptor for power supply.

2. Insert the adaptor's output plug into input socket of the unit.

3. Switch the unit "On" and a green light on the LED display will illuminate.

4. The product will work with auto control mode after it is on.

5. When the tank is full of water a red light in the LED will illuminate indicating that the tank is full.

6. Remove tank and lift cover to pour water out Return tank to its original position to resume work.

 

 

Trouble Shooting

 

 

 

 

 

 

 

 

Trouble

Probable Cause

Solution

• Green light in LED display is

Unit not plugged in.

Plug unit in.

not illuminated.

Power failure.

Check fuse or outlet.

 

 

• Red light in LED display is

Tank is not correctly placed.

Follow emptying instruction in

illuminated.

 

this manual.

 

 

 

Make sure tank is seated in the

 

 

 

appliance correctly.

 

 

 

 

 

 

 

 

 

 

3

Page 3
Image 3
Bionaire BMD100 English, Safety Precaution, Pre-Operatinginstructions, Operating Instructions, Trouble Shooting, Solution