Operation
Fill the 2-in-1 water tank (continued)
3.Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Remove lid, turn over and locate built in measuring cup.
4.Fill formula to the indicated fill line on the built in measuring cup and pour into mouth of the bladder.
5.Fill up the bladder with clean hand hot tap water.
*Do not boil or microwave water as it can destroy the bladder.
6.Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid.
Note: Remember to secure the lid and test to make sure it is secure before picking up the tank.
7.Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position. Bring machine handle back into upright position.
Carpet cleaning strokes
1.Plug the deep cleaner into a proper outlet and turn the power switch ON ( I ). The switch is located on the back of the unit.
2.With your foot, press the handle release lever on the back of the lower body of unit.
3.While pressing the spray trigger, make one slow forward wet pass and another back. Let the BISSELL advanced deep cleaning formula and DirtLifter PowerBrush do the work for you. Caution: Do not over wet.
4.Release the spray trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying.
5.Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the spray trigger until you can’t see any more water being suctioned up.
3.
5.
7.
4.
6.
Tip: Thorough vacuuming before deep cleaning will prevent early clogging of the lint trap.
WARNING:
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.
the warranty.
w w w . b i s s e l l . c o m
7
