Bissell 1694 warranty When It’s Time To Empty The Tank-in-Tank

When It’s Time To Empty The Tank-in-Tank

NOTE: Remove the Tank-in-Tank, following steps 1. and 2. on page 7.

1

Carry the Tank-in-Tank, like a bucket, to the sink.

1. Remove tank lid. Pour out dirty water.

After each use, remove and rinse the lint screen

2. located on the tank lid.

A.Remove tank lid.

2

B.Remove lint screen and rinse under tap. Remove any debris caught in lint screen.

C.Reinsert lint screen on tank lid. The screen will click into place.

D.Replace tank lid.

Refill with cleaning solution and clean tap

3. water—follow steps 4. on page 7.

When a cleaning job is complete, rinse out the

4. Tank-in-Tank by running clean water between the bladder and the tank.

Return the Tank-in-Tank to the machine, follow

5. step 5 on page 7.

Refer to the Storage section on page 14 for

6. final cleanup.

5

Lint Screen

Latched

Tip:

A special red float device in the tank will cause the cleaner to stop removing solution from the carpet and the motor sound will rise in pitch to let you know the dirty water tank is full.

8