Bissell 21H6 Getting ready continued, Before you clean, Cleaning hard floors

Operation

www.bissell.com 800.237.7691

Getting ready continued

2. Fill the water tank

A. Remove tank by lifting straight up and away

from unit.

B. Unscrew cap at bottom of water tank and

remove the insert assembly.

C. Fill water tank with water. For best results,

water should be at room temperature.

D. Replace insert assembly and cap, tighten

until snug.

E. Replace water tank by lining up vertical

guides and gently sliding tank into place.

3. Twist the quick release cord wrap clockwise to

unwrap the power cord completely and plug into

a 120-Volt grounded outlet as described on the

Important Safety Instructions, page 3.

4. The ready light will illuminate when the Steam Mop

Max is ready for use.

Before you clean

Thoroughly sweep or vacuum floor prior to cleaning

with the Steam Mop Max.

Cleaning hard floors

Your Steam Mop Max is designed to clean hard flooring

such as ceramic tile, vinyl, laminate, marble, stone and

sealed hard wood floors. Use of your Steam Mop Max on

waxed or some unwaxed floors may result in a dimin-

ished glossiness. The Steam Mop Max is not for use on

unsealed wood floors. For best results test in an incon-

spicuous area or check the care instructions from your

flooring manufacturer.