Assembly
Quick and easy assembly
1.To assemble the handle connect all three handle sections by connecting the base of one section to the top of another. Repeat with remaining two sections.
2.Attach the handle grip by connecting handle grip to assembled handle.
3.Connect assembled handle and grip to base of unit by inserting handle into base until it snaps into place.
Operation |
| |
Power switch |
| |
Power button is red and located on back left |
| |
hand side of unit. |
| |
To turn unit on, press red power button once |
| |
with foot. | Power | |
To turn unit off, press red power button once | ||
Button | ||
more with foot. | ||
| ||
How to use your cordless vacuum |
|
The cordless bare floor vacuum is a quick and easy way to clean your bare floors and low pile carpets.
1.Detent by holding base steady with one foot and tip handle back.
2.Gently tap red power button on base with your foot to turn unit on.
3.Clean along edges, in corners, and around tables and chairs by lining unit up along surface you want to clean.
4.When finished cleaning, tap red power button on base with your foot to turn unit off.
5.To properly store, return handle to upright position.
6.Recharge if needed.
Note: The cordless bare floor vacuum has a 360 degree swivel handle. To store properly, make sure handle has rotated back to its original position.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 5 |
5/30/08 | 10:30:16 AM |
