Troubleshooting
Cordless bare floor vacuum will not turn on
Possible cause
1.Cordless bare floor vacuum is not charged thoroughly
WARNING:
To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.
Remedies
1.Make sure cordless bare floor vacuum has been properly plugged in an outlet for recommended amount of time. See Charging the battery on page 8
2. | Dirt cup is not secure in unit | 2. | Ensure dirt cup is latched into base by |
|
|
| pressing down on unit |
Cordless bare floor vacuum won’t pick up or low suction | |||
Possible cause | Remedies | ||
1. | Dirt cup is not secure in unit | 1. | Check assembly of base, correctly position |
|
|
| and secure into place |
2. | Dirt cup is full of debris | 2. | Empty dirt cup and replace |
3. | Clog in unit | 3. | Follow instructions on page 7 for clearing clogs |
4. | Filters are dirty | 4. | Check and clean filters. See Cleaning the |
|
|
| filters on page 6 |
Handle will not store properly |
|
| |
Possible cause | Remedies | ||
1. | Handle is upside down | 1. | Rotate handle 180 degrees |
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 9 |
5/30/08 | 10:30:20 AM |
