Quick and Easy Assembly
Assemble the Handle by screwing together two pieces
1. of the Metal Extension Handle. Place the colored Handle Grip on top of the metal extension assembly and twist clockwise until secure. Screw the Handle Clip into the bottom of the Metal Extension Handle assembly.
Place bottom of Handle Clip into the opening at the top
2. of the Perfect Sweep TURBO. Push firmly until the button at the bottom “clicks” into place in the opening.
The Perfect Sweep TURBO must be fully charged before
3. using. To charge the unit, plug the DC Adapter into a standard electrical outlet
Note: The Power Switch must be in the OFF position when charging.
Charging Cord with
DC Adapter Plug Plug into Charging Port on the Motor side of the
Perfect Sweep Turbo.
Charging the Battery
1.
When charging for the first time, allow to charge uninterrupted
2. for at least 16 hours. Thereafter, charge at least 12 hours to renew the Perfect Sweep TURBO battery.
Note: The Power Switch must be in the OFF position when charging.
Decreased operating time may indicate the battery has
3. built up a charging resistance. To recharge, first completely exhaust the battery, recharge it, then exhaust it again before recharging a second time. This procedure may be required more than once.
When charging is complete, be sure to unplug the
4. Perfect Sweep TURBO from the charger.
If your battery still fails to recharge or does not hold a charge of normal duration, call:
BISSELL Consumer Services
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or visit our website @ www.bissell.com
5
6/24/04 10:50:02 AM |
