Operations
Using your cleaner
1.Remove the plastic plug guard and dispose.
2.Unclip polarized plug from power cord.
3.Rotate the Quick Release cord wrap towards floor and slip power cord from upper and lower cord wraps.
4.Connect power cord plug to a polarized outlet.
5.To keep the power cord out of your way while cleaning, place it in the cord hook by the top of the vacuum.
Power Switch pedal
The red power switch pedal is located on the back of the cleaner, under the cord wraps.
1. | Step on the power switch to turn the unit |
|
| “On”. The rotating floor brush and suction |
|
| will start. |
|
2. | Step on the pedal again to turn the vacuum “Off”. | Power |
|
| Switch |
|
| Pedal |
Cord
Hook
Quick
Release
Cord
Wrap
CAUTION:
Before using your vacuum, make sure the dirt container is locked in place, and that all filters (inner circular, outer circular, and pre- motor) are in place. Do not operate your vacuum without these filters.
w w w . b i s s e l l . c o m
Tip:
Before cleaning under low furniture, check for objects that might block the vacuum hose. Do not pick up hard or sharp objects such as glass, nails, screws, coins, paper clips, etc. with vacuum.
8 0 0 . 2 3 7 . 7 6 9 1 | 7 |
5/22/07 | 5:07:23 PM |
