Attach Tools to Vacuum
1. Flip open the Tool Door on the side of the Powerfoot. Insert end of Vacuum Hose into Hose Port fitting tabs into notches, turn clockwise to lock. Hose should be left in place at all times for maximum cleaning performance.
1 |
2. Press Hose into outer Hose Clip. Route Hose over top of cleaner pressing into both sides of Tool Rack. Place end of Wand into the round cup and snap hose into clip with wand ring sliding under clip.
3. Attach Tools to Tool Rack as shown. Slide Dusting Brush onto Upholstery Tool for storage. Place Extension Wand into clips at side between Hose and Bag Assembly.
3
2
Install Dust Bag
1. Unzip Cloth Bag.
2. Fold down top of new Dust Bag.
3. Grasp Bag Collar and push Collar firmly over raised rib on Connector Tube. Pushing too hard on the Collar may rip the Dust Bag.
Tuck remainder of Dust Bag completely
4. into vacuum cleaner. Lay it flat, top to bottom, without bunching.
5. Zip Cloth Bag closed.
3
4
5
