Check Exhaust Filter

This foam filter is located on the side of the Vacuum Body, opposite the Vacuum Hose. Check it at the same time you check/change the bag.

1. Use a small, flat blade screwdriver to gently pop the filter cage off the Vacuum Body.

2.If the filter is dirty, pull it out and rinse under warm running water.

3.Squeeze to remove excess water, then air dry completely before replacing.

4.Replace filter making sure it properly fits into cage.

Replace Lightbulb

1. Remove the clear plastic lens at the front of the

Powerfoot by inserting a small, flat-blade screwdriver into the notch at the bottom of the lens. Twist the screwdriver gently to release the retaining tab, then

pull the bottom of the lens outward.

2.Remove the old bulb by pulling it straight out - do not twist. Gently push replacement bulb into socket.

3.Reposition lens over opening with the top tab positioned inside the Powerfoot. Push the bottom of the lens until remaining tabs snap into place.

Replacement Bulb

Use only BISSELL Replacement Bulb (#0101176) in your BISSELL Upright Vacuum Cleaner. You may purchase the bulb:

with the order form in this User’s Guide, or by calling

BISSELL Consumer Services

1-800-237-7691

Monday - Friday 8 a.m. – 7 p.m. EST

Saturday 9 a.m. – 2 p.m. EST or from the BISSELL website – http://www.bissell.com

11

Page 10
Image 10
Bissell 35401 Check Exhaust Filter, Replace Lightbulb, Replacement Bulb, Remove the clear plastic lens at the front