Attach Tool Caddy to Vacuum Body
5. With the front of Vacuum facing down and the Power Cord placed off to the side, place the Tool Caddy in position on the back of the Vacuum Body. The Tool Caddy should be flush with the back of the Vacuum Body if you have positioned it correctly.
6. Place the three screws into the holes provided, then tighten
with a Phillips head screwdriver until each screw head is flush with the Tool Caddy surface. The top screw will also assemble through the Handle.
Attach Tools to Caddy
Dusting Brush
Crevice Tool
Upholstery Nozzle
Wand
Attach Tools to Caddy as shown. Dust Brush and Upholstery
7. Nozzle storage areas are identified by shape and symbol, the Wand slips into the two clips at the side of the Vacuum Body, and the Crevice Tool slips into the top of the Wand.
Examine the Vacuum Hose Assembly. One end has a short cuff
8. with two (2) slots. Place the short cuff into the hole in the Vacuum Foot Cover (left of the Headlight) and turn clockwise until you feel a slight ‘click.’ Attach the long cuff to the clip near the top of the Vacuum Body Cover.
Assembly is now complete.
Index
Safety instructions . . . . . . . . . .2 Product view . . . . . . . . . . . . . .3 How to put it
How to use your
BISSELL PowerClean . . . . . .
7.Tool Attachment
8.Connect Hose to Powerfoot
5
