Bissell 3590, 8990, 3591 warranty Power Cord Storage

More frequent filter cleaning may be necessary if you are vacuuming new carpet, fine dust, or have allergy con- cerns. Follow the instructions on the following pages to perform these simple maintenance steps.

Empty Dirt Container

The Dirt Container needs to be emptied when the dirt reaches the Full line on the side of the Container.

Unplug cleaner from electrical outlet.

Slide the Lock ‘n Seal Lever to the "Unlock" position.

Grasp handle and pull the Dirt Container straight out to remove from vacuum.

Empty dirt into garbage container.

Put the Dirt Container back in the vacuum and slide the lever to the "Lock" position.

Note: The Dirt Container may be washed in warm water with a mild detergent. Make sure it is com- pletely dry before using again.

How to Maintain Your BISSELL CleanView

Clip molded plug to Power Cord to secure.

Power Cord Storage

When you are done using your BISSELL CleanView, return it to the Upright position and store the Power Cord.

NOTICE:

1.

Turn vacuum cleaner off.

Unplug Power Cord by grasping the polarized plug (NOT

While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are

2. the cord) and disconnect from outlet.

Loop Power Cord around Cord Wraps on side of

3. vacuum cleaner.

not associated in any way with the main power supply.

4.

	To maintain maximum cleaning performance, the follow-
		WARNING: To
	ing maintenance steps must be performed:
		reduce the risk of electric
	Empty the Dirt Container when the dirt reaches the	shock, turn Power Switch
1.
	“Full” line on the side.	OFF and disconnect
		polarized plug from
		electrical outlet before
2.	Clean or replace the Pre-Motor Filter at least once a
		performing maintenance or
	month.
		troubleshooting checks.
3.	Clean or replace the Post-Motor Filter every three
	months.	Tip:

For maximum cleaning performance, Check and clean or replace all filters

as suggested.

1.

2.

3.

4.

5.

	Full Line
Unlock	Lock Position
Position

8