How To Use Your BISSELL CleanView
Handle Positions
Press the Handle Release Pedal with your foot to place your CleanView into one of three cleaning positions.
1. Upright- For storage and above floor cleaning with tools.
Normal Cleaning- Press Handle Release Pedal once. Use
2. for most household floor cleaning tasks.
Low Cleaning- With the vacuum in normal cleaning position,
3. press Handle Release Pedal again. Use for reaching under low furniture such as tables, chairs or beds.
Power Height Adjustment
The Powerfoot/Rotating Floor Brush on your BISSELL CleanView can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.
NOTICE:
The Floor Brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the Powerfoot tilt forward.
CAUTION:
Before using your vacuum, make sure that the Dirt Container and Upper Tank are in locked position and that both filters
1
2
1.
2.
Place Handle in Upright Position.
Turn Height Adjustment knob to desired setting.
Lowest Setting - For bare floors.
Medium Settings - For short and medium pile carpets.
Highest Setting - For plush pile carpet.
Place the Handle into the Normal Cleaning Position and
3
Tip:
Before cleaning under low furniture, check area first for objects that might harm the unit or block the
3. the Powerfoot will adjust to the setting chosen.
NOTE: You may also adjust the setting while in the Normal Cleaning Position.
Transporting Cleaner
To move your cleaner from room to room, put the Handle
1. in the upright position, tilt the cleaner back on its rear wheels and push forward.
The cleaner can also be moved by using the
2. Carrying Handle.
6
Vacuum Hose.
Tip:
| Your BISSELL |
| CleanView |
| features a |
| |
| Cord Wrap. To |
| remove the |
| Power Cord |
| quickly and |
| easily, rotate the |
Carrying | Upper Cord Wrap |
towards floor, | |
Handle | and slip Power |
| Cord from Upper |
and Lower
Cord Wraps.
