Special On-Board Tools
Your BISSELL CleanView is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools.
NOTICE:
The Floor Brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the Powerfoot tilt forward.
1.
Raise Handle to Upright Position.
Grasp the Quick Reach Handle and lift Hose Wand to
2. separate from suction intake opening.
Attach tools by firmly pushing onto Vacuum Hose
3. or Extension Wand.
Dusting Brush Tool:
Use to dust furniture, blinds, books, lamps, shelves, draperies, cushions.
Crevice Tool:
Use in tight narrow spaces.
Extension Wand:
Use with desired attachment for a longer reach.
Tip:
Hair, string and small objects can block the Vacuum Hose or Tools. Check them occasionally for obstructions.
Power Cord Storage
When you are done using your BISSELL CleanView, return it to the Upright position and store the Power Cord.
CAUTION:
The Rotating Floor Brush continues to rotate while tools are in use. To reduce the risk of injury from moving parts,
1.
Turn vacuum cleaner off.
Unplug Power Cord by grasping the plug (NOT the cord)
always move the cleaner with the Carrying Handle at the back of the cleaner. Always place vacuum cleaner on floor with
2. and disconnect from outlet.
Loop Power Cord around Cord Wraps on side of
3. vacuum cleaner.
Handle in Upright position when using tools. Never place your fingers under the cleaner when it is running. Never place Powerfoot on furniture or uneven surfaces. Do not place vacuum cleaner close enough
4.
Clip molded plug to Power Cord to secure.
to objects to pull them into rotating brush.
How to Maintain Your BISSELL CleanView
To maintain maximum cleaning performance, the following maintenance steps must be performed:
Empty the Dirt Container when the dirt reaches the “Full”
1. line on the side.
Check the Upper Tank and
2. clean or replace as needed.
Clean or replace the
3. three months.
Note: More frequent filter cleaning may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps.
NOTICE:
While vacuuming, certain carpets and low humidity conditions may generate small static discharges.
The discharges are entirely harmless and are not associated in any way with the main power supply.
WARNING: To reduce
the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet before performing mainte- nance or troubleshooting checks.
7
