Bissell 36U3 Product view, Assembly, Note The Power Switch must be in, the OFF position when

Product view

Non-Slip

Handle Grip

Charging Port

Handle Assembly

DC Adapter

Assembly

The Supreme Sweep Compact requires very little assembly. Remove it from the box and check it against the illustration to familiarize yourself with the components listed. The exploded view diagram with part names will also be helpful if you should need to order a part at a later time.

1.Assemble the handle by taking the section with the non-slip grip (1) and the middle section which has grey connector pieces on each end (2). Insert the middle section (2) into the grip section (1) and twist to tighten into place. Next, take this assembled section and insert into the bottom section with a hole

(3). Twist to tighten into place.

2.Take the assembled handle and line up the bot- tom hole with the button on the swivel connec- tor on top of the Supreme Sweep Compact.

Push the button on the swivel connector down while pushing the assembled handle over the button, locking the handle into place.

3.The Supreme Sweep Compact must be fully charged before using. To charge the unit, plug the charger into a standard electrical outlet (230-240v-50hz); plug the opposite end into the charging port on the back side of your Supreme Sweep Compact . The charging indicator light will illuminate when properly connected and will not turn off when fully charged. The Supreme Sweep Compact is now charging.

Metal Extension

Handle Assembly

Swivel Connector

Charging Indicator Light

Power Switch

Dirt Container Release

WARNING:

Electric/electronic appliances should not be subjected to extreme temperatures or high humidity.

Do not store the Supreme Sweep Compact in bathing areas or close to stoves, furnaces or radiators.

Handle Assembly

1

2

1 2 3

3

Charging Port

	Note: The Power Switch must be in
	the OFF position when
4	charging.
	w w w . b i s s e l l . c o m