Operation
How to use your vacuum continued
3.As a Multi-Purpose Vacuum:
The crevice tool and floor nozzle may be used with the hand vacuum. To use for cleaning in tight spaces, insert the crevice tool into the opening at the bottom of the dirt container. Press firmly to secure in place. To clean a wider surface, remove the crevice tool and attach the floor nozzle by inserting it into the opening at the bottom of the dirt container. Press firmly to secure in place.
Power cord storage
1.Turn Vacuum off (O).2.Unplug power cord by grasping the polarized plug, NOT the cord, and disconnect from outlet.
3.Loop power cord around cord wraps on the handle.4.Clip molded plug to power cord to secure.
Maintenance and care
To maintain maximum performance from your BISSELL vacuum, perform these simple mainte- nance checks:
Emptying the dirt container
1.Turn Vacuum off (O).
2.To remove dirt from the dirt container and filter, hold the vacuum vertically as shown. Depress and hold latch on top of the vacuum to release the dirt container.
3.Gently pull dirt container away from the hand vacuum grip and remove the filter as shown. Empty into waste container.
4.The dirt container may be rinsed with warm water and a mild detergent if needed. The dirt container must be thoroughly dried before replacing.
5.Replace filter. Attach dirt container to vacuum by depressing Latch and securely fitting onto hand grip. Make sure dirt container is correctly secured.
W A R N I N G :
To avoid injury, turn vacuum OFF and unplug cord from wall when not in use.
23
5
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 | 165 |
