Maintenance and care
Maintaining TurboBrush
The TurboBrush should be checked regularly for clogs or debris wrapping around the brush.
1.Unplug the vacuum from electrical outlet.
2.If a clog is present or debris is visible, unscrew
2.
the two screws on the back of the TurboBrush to remove the faceplate and clear any obstructions.
3. | To clean debris from the brush, remove the | 4. | |
| brush from the drive belt and clean debris. |
|
|
4. | Reposition the drive belt on the brush. |
|
|
| Place ends of brush in slots on sides as |
|
|
| shown. Reposition faceplate and secure with |
|
|
| two screws. |
|
|
14 w w w . b i s s e l l . c o m
2/7/07 4:03:46 PM