Bissell 86T3 Cleaning with Oxy Gen2 tool, Select models only, To pretreat heavy traffic areas

Operations

Cleaning with Oxy Gen2 tool

Select models only

1.Follow instruction on page 10 to attach hose to machine.

2.To pretreat heavy traffic areas:

A.Pour Oxy GEN2 formula into the Oxy GEN2 Tool and attach tool to your machine’s hose.

B.Hold tool 2-4 inches above the floor and press red trigger to spray onto carpet.

C.Wait for 3-5 minutes then clean as normal using your machine

3.To use as a spot and stain tool on carpet:

A.Pour Oxy GEN2 formula into the Oxy GEN2 Tool and attach tool to your machine’s hose.

B.Hold tool 1-2 inches above the floor and press trigger to spray onto carpet. Spray generously, but do not overwet the carpet.

C.Move the bristles back and forth over the spot.

D.Suction up solution/stain immediately with your tool.

E.Repeat as needed.

11

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1