Operations
Fill the tank continued
3. Fill with hot (not boiling) tap water to the | 3. |
WATER line. Fill the rest of the tank with |
|
BISSELL 2X Formula to the FORMULA |
|
line. Replace and tighten the black cap. |
|
Caution: Do not microwave or boil water before filling.
4. Place solution tank on lower body. |
| |
Tip: To ensure proper function, make sure |
| |
the tank is completely seated. Failure to |
| |
do so can result in reduced or no spray. | 2. | |
Carpet cleaning | ||
|
1.Plug into proper outlet.
2.Adjust the retractable handle by turning counterclockwise and lifting the handle up. Turn clockwise to secure.
3.With foot press the red power button, located on the back of the machine.
NOTE: Handle must be in the full upright position before cleaning.
4.With foot, press the grey recline lever. located next to power button.
5.Cleaning Strokes. While pressing the trigger, make one slow forward wet pass and another one back.
Caution: Do not overwet.
6.Release the trigger and make one slow for- ward and backward pass over the same area.
7.Repeat steps 5 and 6 until solution being pulled up appears clean.
8.Empty the collection tank when dirty water reaches the full line, or when the solution tank is empty.
Empty the collection tank
2a.
1.With foot press the red power button, to turn off and unplug power cord from outlet.
2.Remove the collection tank from base of unit.
2a. | Release collection tank latches (on |
|
each side) by pulling up from the bottom | 3. | |
of latch and then out. |
| |
2b. | Carefully remove tank by lifting up |
|
on the tank handle.
3.Carry collection tank to a toilet or sink. To empty, pour out contents using opening at
6 | back of tank. |
w w w. b i s s e l l . c o m |
4.
3.
Power
4.
Recline
2b.
8 0 0 . 2 3 7 . 7 6 9 1
