Operations
Power cord
The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.
Automatic cord rewind
Automatic
Cord Rewind
Button
Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.
Power button
Turn the power on or off by pressing lightly downward on the power button (
).
Motorized powerhead
Set the power switch on the handle to 1 for rotating brush or 0 to turn rotating brush off.
NOTE: The power brush will automatically turn off if the telescopic tube is in an upright position to protect your carpet from potential damage caused by the rotation of the power brush.
NOTE: The power brush will automatically turn off if the rotator bar is blocked by clogs (hair, cloth, ect.) for your protection. In that case, turn off the power head, unplug the vacuum, clean the clog, and
Variable suction power control
CAUTION:
Be careful to avoid injury as cord retracts very quickly.
Power Button
Variable Suction
Control
PowerBrush
On/Off
The variable suction power control is located on the top of the handle. Slide the control toward the larger dots for maximum suction. Slide the control toward the smaller dots to minimize suction for lightly soiled areas or delicate fabrics.
caution:
Before using your vacuum, make sure that the dust bag and all filters
w w w . b i s s e l l . c a
1 - 8 0 0 - 2 6 3 - 2 5 3 5 | 7 |
