Maintenance and care

Changing the light bulb

2

1.Unplug cleaner from electrical outlet.

2.Recline handle for easier access to light bulb and remove screw to lift off lens.

3.Remove the bulb by grasping bulb and pull-

ing straight out of the socket. Install the new

3

bulb by pushing gently into the socket until the bulb snaps into place.

TurboBrush maintenance

The TurboBrush should be checked regularly for clogs or debris wrapping around the brush.

1.Remove tool from hose or front of vacuum.

2.

Twist collar so opening is at the top and lift

2

 

top cover to remove.

3.Remove the brush from the belt and clean debris.

4.Replace the brush inside the belt and place

ends into slots on sides as shown.

4

5.Reposition top cover making sure to line up inside tab at the front with the opening on the cover. Twist collar until opening is at the bottom to lock into place.

5

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

15

Page 15
Image 15
Bissell 50C9 warranty Changing the light bulb, TurboBrush maintenance, Ing straight out of the socket. Install the new