How to use your Flip-Ease
Dry Vac
1.Attach the Gentle Clean™ MicroFiber pad onto the base of the unit. Begin by attaching the pad onto the Velcro on one side of the unit, wrapping it under the foot and attaching on the other side
Tip: If the MicroFiber covers the vacuum suction path, the unit will not suction.
Suction Path 
Microfiber Pad
Underside of foot
2.Turn the unit on.
3.With the Dry Vac side of the unit facing forward, begin cleaning. You will see dry dirt, crumbs and debris being collected in the Dirty Tank.
4.Check the filter frequently. If you see hair and fuzzy debris collecting on the filter, remove the dirty tank and dirty tank lid to clean the filter.
To clean the filter, gently tap it on the edge of the trash can, brushing off anything that may be sticking to the filter. The filter can also be rinsed with warm water. Let air dry before inserting back into the unit.
6 w w w . b i s s e l l . c o m
Tip:
The MicroFiber pad should be placed in the areas directed. Covering the vacuum suction path will stop all suction.
11a
23
4
8 0 0 . 2 3 7 . 7 6 9 1
6/20/06 9:12:26 AM
