Bissell 5288 warranty Maintenance and Care, Switching from Dry Vac to Wet Mop

How to use your Flip-Ease Continued

Switching from Dry Vac to Wet Mop

1.To change from dry vacuuming to wet cleaning simply flip the unit around!

1

Tip:

When the trigger is squeezed the vacuum suction will stop; extending battery life.

Wet Mop

1.By squeezing the trigger, you will turn

off the vacuum suction. 2

2.Water and Solution will flow to the 2 spray tips on the Wet Mop side. Gently mop the

floor with the Gentle Clean™ MicroFiber pad. Depressing the trigger will dispense water and solution based on your cleaning job.

Sticky, dirty areas may require more water and solution.

Floor will need to air dry for 3-5 minutes.

Cleaning the Gentle Clean™

MicroFiber Pad

1.After Wet Mopping, remove the MicroFiber Pad to launder or wash.

To wash, simply toss in the wash, air dry and reuse. No need to buy disposable cloths every time you use your Flip-Ease!

Maintenance and Care

Storing and Charging your Flip-Ease

Your Flip-Ease can be stored Ready-to-Use, by leaving water and formula in the Clean Tank.

Be sure to remove the MicroFiber Pad to clean.

1.To charge while storing, place the charger plug into the charging port on the side of the unit. Make sure it is securely connected and the charger indicator light is illuminated.

w w w . b i s s e l l . c o m

ug603-6913_5288_606.indd 7

Spray Tips	Tip:
	You do not have
	to empty the Dirty
	Tank before wet
	mopping.

1

1

Charger

Plug

8 0 0 . 2 3 7 . 7 6 9 1	7
6/20/06	9:12:27 AM