
17
www.bissell.com  800.237.7691
Troubleshooting
DirtLifter PowerBrush does not turn
Possible cause  Remedies
1.  The brush belt or pump belt is off or broken.  1.  Refer to Remedy 4 on page 16 to check if  
     brush belt or pump belt is broken.
Cleaner not picking up solution
Possible cause  Remedies
1.  ReadyTools dial may be on the  1.  Set ReadyTools dial to either  floor 
  wrong  setting for the cleaning job.     cleaning or tools.
2.  Poor tool  position.   2.  Adjust angle; a pply more  
  (Hand held attachments only).    downward pressure.
3.  Removable nozzle may  not be properly attached.  3.  Make sure  nozzle is on correctly by  
    slightly  raising front of machine to line up  
    slots  on the base of the machine with the  
    hooks  on nozzle. Attach at base first and  
    then  click nozzle into place. Refer to  
    image  5 on page 12.
4.  2-in-1 tank lid  is not properly installed.  4.  Re-install lid; refer  to the images on page 10. 
5.  2-in-1 tank is  not properly seated.  5.  2-in-1 tank must  be firmly seated to function; 
    remove and reseat 2-in-1 tank. 
6.  2-in-1 tank has  picked up maximum dirty water.  6.  Empty 2-in-1 tank and refill, refer to the  
    Operation section.
7.  The lint screen  may be clogged.  7.  Clean out lint screen. Refer to  page 12.
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the storeFor any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
ug120-4078_25A3_908.indd   17 10/14/08   1:21:09 PM