Maintenance and care
Replacing the post-motor HEPA media filter
The
1. Turn vacuum OFF ( ). Unplug the vacuum from electrical outlet.
2.Remove the filter door (located on the back of the vacuum) by pulling down on the filter door and pulling it toward you.
3.Remove the
4.Replace the
NOTE: The
2.
3.
5.Replace the filter door by inserting the two tabs at the bottom of the filter door, pushing down on the bottom of the filter door and pushing it back into the vacuum. Be sure the top tabs are secured.
Replacing the dirt cup HEPA media filter & cleaning the foam filter
IMPORTANT: Make sure the dirt cup is | 1. | |
empty before you replace or clean these | ||
| ||
filters. |
|
1.To remove the dirt cup HEPA media filter, pull down on the front snap.
2. Remove and replace as necessary.
NOTE: The dirt cup HEPA media filter is a white, pleated HEPA media filter. This filter is NOT washable and must be replaced when it becomes dirty.
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 116 |