Bissell 66T6 warranty Assembling your vacuum, 1.2 3 Storing in the in-useposition A1.A2

Assembling your vacuum

1.	Connect swivel hose by squeezing both locking
	buttons and inserting it into the suction opening on
	the canister. Once the swivel hose is inserted in the
	suction opening, release the locking buttons.
2.	Connect telescoping extension wand to the handle
	end of the flex hose. Twist slightly to tighten.
3.	Connect floor nozzle to the end of the telescoping
	extension wand. Twist slightly to tighten.
4.	Once assembled, you can store your
	vacuum in one of two positions:
	A.	Storing in the in-use position:
		1.To store with the floor nozzle attached,
		insert the storage clip (located on the
		back of the floor nozzle) into the
		storage slot on the rear of the vacuum.
		2.To store without the floor nozzle
		attached, insert the storage clip (located
		on the bottom of the telescoping
		extension wand) into the storage slot on
		the rear of the vacuum.
	B.	Storing in the upright position:
		1.To store with the floor nozzle attached,
		stand the vacuum in the upright position
		and insert the storage clip (located on the
		back of the floor nozzle) into the storage
		slot on the bottom of the vacuum.

2.To store without the floor nozzle attached, stand the vacuum in the upright position and insert the storage clip (located on the bottom of the telescoping extension wand) into the storage slot on the bottom of the vacuum.

Warning:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

1.2.

3.

Storing in the in-use position

A1.A2.

Storing in the upright position

B1.B2.

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1 165