Bissell 68G9 warranty Operations, Power cord, Automatic cord rewind, Power button

Models: 68G9

1 16
Download 16 pages 59.16 Kb
Page 7
Image 7
Operations

Operations

Power cord

The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.

Automatic cord rewind

Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.

Power button

Turn the power on or off by pressing lightly downward on the power button (Power cord).

Automatic cord rewind caution:

Before using your vacuum, make sure that the dust bag and all filters (pre-motor and post-motor) are in place. Do not operate your vacuum without the dust bag and filters.

Automatic

Cord Rewind

Button

Power buttonBe careful to avoid injury as cord retracts very quickly. CAUTION:

Be careful to avoid injury as cord retracts very quickly.

Manual backgroundPower Button

w w w . b i s s e l l . c o m

7

Page 7
Image 7
Bissell 68G9 warranty Operations, Power cord, Automatic cord rewind, Power button, w w w . b i s s e l l . c o m