Operations
Variable suction power control
The variable suction power control is located on the top of the vacuum. Slide the control toward the larger dots for maximum suction. Slide the control toward the smaller dots to minimize suction for lightly soiled areas or delicate fabrics.
Air flow regulator
Open the air flow regulator by sliding the regulator back towards the handle to an open position to reduce suction for delicate fabrics.
Close the air flow regulator by sliding the regulator down to the closed position for full suction.
High filtration dust bag
The BISSELL IllumiClean features a
Bag change indicator
The bag change indicator is located between the power button and the automatic cord rewind button. If the bag change indicator turns orange while you are vacuuming, the dust bag needs to be replaced. The dust bag may appear to be full or only partially full depending upon the type of debris picked up. Fine particles can block the airflow in the dust bag and reduce suction before the dust bag is full. If the bag change indicator remains orange, even after changing the dust bag, turn the vacuum off and check for a clog in the hose or tools.
Note: The indicator may turn orange when using the tools due to the restricted airflow. This does not necessarily mean that the dust bag is full. If the indicator does not turn off once the tool is removed, check for a clog in the hose/tools or replace the dust bag.
w w w . b i s s e l l . c o m
9