Washable Pre-Motor Filter
The
Pull up on the Vacuum Bag Compartment Release lever
1. to open the canister. The
Slide the filter out of the attachment channel. The filter
2. may be gently cleaned by washing in warm water with a mild detergent. Allow filter to dry completely before reinstalling. If filter is torn, replace with a new filter.
Install filter. Slide into attachment channel. Press down to
3. secure. Close canister.
Washable HEPA Filter & Post-Motor Filter
The filters are located in the canister of your vacuum cleaner. The HEPA Filter is designed to promote optimum cleaning efficiency, as well as the removal of dust mites, pollen, and ragweed. Both filters should be regularly checked, and cleaned if they appear dirty or if you notice excessive amounts of dust inside the canister. They need to be replaced if severely damaged or torn.
Pull up on the Vacuum Bag Compartment Release lever
1. to open the canister. The HEPA Filter is at the top and features a locking tab.
Pull up on the tab and lift out the filter. Below the HEPA
2. Filter is the
The filters may be gently cleaned by washing in
3. warm water with a mild detergent. Allow filters to dry completely before reinstalling. If either filter is torn, replace with new filter.
4. | Reinstall filters. Press down on the HEPA Filter locking |
tab. The filter should snap into place. Close canister. |
DirtLifter® PowerBrush
The Brush and Drive Belt should both regularly be checked for wear or damage. You should also keep the Brush and Brush Ends free of string, hair, and carpet fibers as these can become entangled in the Brush and reduce its cleaning effectiveness.
8
HEPA Filter
7/27/05 11:56:03 AM |
