Bissell 70V9 Operations, Handle position, Height adjustment, Power switch, Transporting cleaner

Operations

Handle position

Press the handle release pedal with your foot to place your CleanView Helix into one of three cleaning positions.

1.Upright– For storage and above floor cleaning with tools.

2.Normal cleaning – Press handle release household floor cleaning tasks.

3.Low cleaning –With the vacuum in normal cleaning position, press handle release pedal again, use for reaching under low furniture such as tables, chairs or beds.

Height adjustment

There are five height settings available for various floor surfaces. Turn the dial on the foot of the cleaner to the desired setting.

Lowest setting – For low pile carpet or bare floors. To pick up debris it may be necessary to move up one setting.

Medium setting – For medium pile carpet.

Highest setting – For high pile and most shag carpet.

Note: For optimal carpet cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.

If the dial is difficult to turn, tilt the cleaner back slightly to take the weight off the foot while turning.

Power switch

The power switch is located just below the handle on the side of the vacuum.

I - ON O - OFF

Transporting cleaner

1.To move your cleaner from room to room, put the Handle in the upright position, tilt the cleaner back on its rear wheels and push forward.

2.The cleaner can also be moved by using the carrying handle.

CAUTION:

Before using your vacuum, make sure that the dirt container is in locked position and that all filters (inner circular, outer circular, pre-motor and post-motor) are in place. Do not operate your vacuum without these filters.

Tip:	Tip:
Hair, string and	Before cleaning
small objects can	under low furniture,
block the vacuum	check area first for
hose or tools. Check	objects that might
them occasionally	harm the unit or block
for obstructions.	the vacuum hose.

Tip:

Your vacuum features a Quick Release cord wrap. To remove the power cord quickly and easily, rotate the upper cord wrap towards floor, and slip power cord from upper and lower cord wraps.

6 w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1