Troubleshooting
Vacuum cleaner won’t run
Possible causes
1.Vacuum cleaner is not plugged in
2.Household fuse/circuit breaker
WARNING:
To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting.
Remedies
1.Check electrical plug
2.Check/replace fuse or circuit breaker
Decreasing suction or no suction
Possible causes | Remedies |
1.Floor nozzle, flexible hose, or extension wand is blocked 1. Remove each part and check for blockages
2. | Filters are dirty | 2. | Check both filters and clean or replace |
|
|
| as needed |
3. | Dust bag is full | 3. | Replace with new dust bag |
4. | Crack or hole in flexible hose | 4. | Check hose and replace if needed |
5. | Hose is clogged | 5. | Remove hose, check for a clog and clear |
6. | Air flow regulator or variable suction control | 6. | Check for correct setting |
| is on low suction setting |
|
|
Cord does not rewind fully |
|
| |
Possible causes | Remedies | ||
1. | Cord may be twisted or wound unevenly | 1. | Gently pull the cord out and rewind |
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at
w w w . b i s s e l l . c o m
8 0 0 . 2 3 7 . 7 6 9 1 | 9 |
5/22/07 | 5:01:22 PM |
