Maintenance and care
Cleaning or Replacing the filters
Use only genuine BISSELL model number 54A2 replacement filters in your BISSELL vacuum. To purchase visit:
WWW.BISSELL.COM or call
1.Turn power OFF (O). Unplug unit from electrical outlet.
2.Remove the dirt container as previously directed on page 6 and set aside.
3.Grasp the filter cup and lift up and out.
4 Rotate top of filter cup to the | unlock |
position and remove. |
|
5.Remove filter assembly from cup. Separate the foam filter from the inner pleated filter.
6.Foam filter may be washed in warm water. Mild detergent may be used if desired. Rinse well and let air dry thoroughly before replacing.
7.Pleated filter should be tapped firmly against the inside of a trash can, removing any visible dirt.
Do not wash the pleated filter.
8.Before replacing filters back into unit, be sure they are dry and nested back together.
9 . Place filters back into filter cup, replace cover and twist to lock position, making sure the dots are aligned.
Replace filter cup back into machine, insert dirt container and snap firmly into place.
w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of injury from moving parts and/or electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing troubleshooting checks.
3.
5.
8.9.
caution:
Never operate your PowerEdge vacuum without the filter in place. Doing so may damage the motor and void the warranty.
7
8 0 0 . 2 3 7 . 7 6 9 1
