Assembly
The PowerEdge is shipped in three pieces: 1. Upper handle, Body, Foot
No tools are required for assembly.
1. | Slide upper handle into body and push |
|
| in firmly until handle locks into place. |
|
2. | Slide foot onto body of unit until foot | 3. |
| locks into place. | |
|
|
3.Wrap power cord on back of unit.
Operations
Transporting unit
Place unit in upright position and tip back to roll on rear wheels.
Power switch
The power switch is located on the top of the body of unit.
Push switch ON (l) to vacuum and OFF
(O) when cleaning is complete.
How to use your hard floor vacuum
1. Turn quick release cord wrap to remove | 1. | |
power cord; plug into electrical outlet. | ||
|
2.Lightly press the foot of the vacuum and pull handle back to detent.
3.Turn power switch to ON (I) position
4. | Clean your hard floors, under cabinets, | 4. |
|
and easily maneuver around furniture. To clean along edges, align the end suction points along the areas you want to clean.
5.When finished cleaning, turn power switch to OFF (O) position.
6.To store the unit, return handle to upright position.
2.
Power
Switch
2.
5
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
