Troubleshooting
Vacuum cleaner won't run.
Possible Causes
1Power cord not firmly plugged in
2Blown household fuse or breaker
Vacuum cleaner won't pick up dirt.Possible Causes
1Incorrect Height Adjustment
2Hose not attached to suction opening
3Crack or hole in Hose
4Broken or worn Drive Belt
5Rotating Floor Brush bristles worn
6Rotating Floor Brush jammed
7Clog in vacuum
8Dirt Container full
9Dirt Container or Upper Tank not installed properly
10 Filters are dirty
Remedies
1Check electrical plug
2Check/replace fuse - Reset breaker
Remedies
1Adjust Powerfoot to correct height setting
2Grasp Quick Reach Handle and firmly push Hose Wand onto the suction opening
3Check Hose and replace if needed
4Replace Drive Belt, see pg. 10
5Replace brush
6Remove brush and clean debris from brush ends
7Follow instructions on pg. 11 for clearing clogs
8Empty Dirt Container
9Position correctly and lock in place
10Check and clean Upper Tank,
Tools won't pick up dirt.
Possible Cause
1Crack or hole in Hose
2Clog in vacuum
3Dirt Container full
4Dirt Container or Upper Tank not installed properly
5Filters are dirty
Remedies
1Check Hose and replace if needed
2Follow instructions on pg. 11 for clearing clogs
3Empty Dirt Container
4Position correctly and lock in place
5Check and clean Upper Tank,
Vacuum cleaner is difficult to push.
Possible Causes | Remedies |
1 Incorrect Height Adjustment | 1 Adjust Powerfoot to correct height setting |
Visible dirt escaping from cleaner.
Possible Causes | Remedies |
1Dirt Container full
2Filters missing or installed incorrectly
3Dirt Container installed incorrectly
1Empty Dirt Container
2Check Upper Tank,
3Pull out and
WARNING:
To reduce the risk of injury from moving parts and/ or electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing troubleshooting checks.
If suggested solutions do not correct the problem, call:
BISSELL Consumer Services
Saturday | 9 a.m. — 8 p.m. ET |
or visit the BISSELL website - www.bissell.com
12