Attach Vacuum Hose and Tools Continued
Slide the Extension Wand and the Crevice Tool together
4. into the storage clip as shown.
5.
Slide the Dusting Brush Tool into the storage clip as shown.
How To Use Your BISSELL CleanView
Handle Positions
NOTICE:
The Floor Brush will continue to rotate while you use your vacuum for above floor cleaning. To prevent carpet damage, do not lean on the vacuum or let the Powerfoot tilt forward.
Press the Handle Release Pedal with your foot to place your CleanView into one of three cleaning positions.
1. Upright- For storage and above floor cleaning with tools.
Normal Cleaning- Press Handle Release Pedal once. Use
2. for most household floor cleaning tasks.
Low Cleaning- With the vacuum in normal cleaning position,
3. press Handle Release Pedal again. Use for reaching under low furniture such as tables, chairs or beds.
CAUTION:
Before using your vacuum, make sure that the Dirt Container and Upper Tank are in locked position and that both filters
1
2
Power Height Adjustment
The Powerfoot/Rotating Floor Brush on your BISSELL CleanView can be adjusted to clean several floor surfaces.
3
Tip:
Before cleaning under low
1.
2.
NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.
Place Handle in Upright Position.
Turn Height Adjustment knob to desired setting.
Lowest Setting - For bare floors.
Medium Settings - For short and medium pile carpets.
Highest Setting - For plush pile carpet.
Place the Handle into the Normal Cleaning Position and
furniture, check area first for objects that might harm the unit or block the Vacuum Hose.
Tip:
Your BISSELL CleanView features a
3. the Powerfoot will adjust to the setting chosen.
NOTE: You may also adjust the setting while in the Normal Cleaning Position.
6
Power Cord quickly and easily, rotate the Upper Cord Wrap towards floor, and slip Power Cord from Upper and Lower Cord Wraps.
