Black & Decker AS600 manual How to Use, Getting Started, Filling Water Tank, Ironing with Steam

Product may vary slightly from what is illustrated.

1.Spray nozzle

2.Water-fill cover

3.Dry/Steam selector

4.Spray button

5.Surge-of-steam button

6.Comfort Grip™ handle

7.Pivoting cord

8.Fabric guide

9.Heel rest

10.Temperature-ready indicator light

11.Fabric-select dial

12.Auto Clean® button

13.Water tank

14.Soleplate

Symbols

Dry

Steam/Blast of

Steam

Spray

How to Use

This appliance is for household use only.

GETTING STARTED

Remove any labels, stickers or tags attached to the body or soleplate of the iron.

Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.

Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.

FILLING WATER TANK

1. Place your thumb at the bottom center of the water-fill cover and push up to open (A).

A

2.Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark

on the water tank (B). Do not overfill.

3. After filling, close the water-fill cover.

B

4. Plug in the iron. The temperature-ready indicator light comes on (C).

C

IRONING WITH STEAM

Surge of Steam

Use to remove stubborn creases.

1.With the water tank filled to the MAX mark, turn the fabric-select dial to appropriate setting (between 4 and 6) for your fabric (D). See fabric guide on the heel rest and

read garment’s label to help you determine fabric type.

D

2. Move the dry/steam selector to the desired steam

level (E).

E

9 10