POWER CONNECTIONS

A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should be protected with a 20 Amp time lag fuse. If an extension cord is used, use only 3-wire extension cords which have 3-prong grounding type plugs and matching receptacle which will accept the machine’s plug. Before connecting the machine to the power line, make sure the switch (s) is in the “OFF” position and be sure that the electric current is of the same characteristics as indicated on the machine. All line connections should make good contact. Running on low voltage will damage the machine.

WARNING: SHOCK HAZARD. DO NOT EXPOSE THE MACHINE TO RAIN OR OPERATE THE MACHINE IN DAMP LOCATIONS.

GROUNDING INSTRUCTIONS

WARNING: SHOCK HAZARD. THIS MACHINE MUST BE GROUNDED WHILE IN USE TO PROTECT

THE OPERATOR FROM ELECTRIC SHOCK. Your machine is wired for 120 Volt, 60 HZ alternating current. Before connecting the machine to the power source, make sure the switch is in the “OFF” position.

1. All grounded, cord-connected machines:

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with an electric cord having an equipment- grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment- grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the machine is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding type plugs and matching 3-conductor receptacles that accept the machine’s plug, as shown in Fig. A.

Repair or replace damaged or worn cord immediately.

2.Grounded, cord-connected machines intended for use on a supply circuit having a nominal rating less than 150 volts:

If the machine is intended for use on a circuit that has an outlet that looks like the one illustrated in Fig. A, the machine will have a grounding plug that looks like the plug illustrated in Fig. A. A temporary adapter, which looks like the adapter illustrated in Fig. B, may be used to connect this plug to a matching 2-conductor receptacle as shown in Fig. B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green-colored rigid ear, lug, and the like, extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. Whenever the adapter is used, it must be held in place with a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electric Code.

WARNING: SHOCK HAZARD. IN ALL CASES, MAKE CERTAIN THE RECEPTACLE IN QUESTION IS PROPERLY GROUNDED. IF YOU ARE NOT SURE HAVE A QUALIFIED ELECTRICIAN CHECK THE RECEPTACLE.

GROUNDED OUTLET BOX

CURRENT

CARRYING

PRONGS

GROUNDED OUTLET BOX

GROUNDING

MEANS

ADAPTER

GROUNDING BLADE

IS LONGEST OF THE 3 BLADES

Fig. A

Fig. B

4

Page 3 Page 5
Page 4
Image 4
Black & Decker BDBS100 instruction manual Power Connections, Grounding Instructions
Page 3 Page 5

BDBS100 specifications

The Black & Decker BDBS100 is a versatile and innovative cordless screwdriver designed for a variety of applications, making it an essential tool for both DIY enthusiasts and professionals. This power-packed tool combines exceptional performance with user-friendly features.

One of the standout characteristics of the BDBS100 is its compact and lightweight design. Weighing in at just under two pounds, it can be easily maneuvered in tight spaces without causing user fatigue during extended use. The ergonomic handle provides a comfortable grip, allowing for better control and precision while driving screws.

The BDBS100 is equipped with a powerful motor that delivers a maximum torque of 180 in-lbs, making it suitable for a range of materials, from wood to metal. With its variable speed settings, users can adjust the output to meet the demands of different tasks, ensuring optimal performance every time. The built-in LED work light is a convenient feature that illuminates dark work areas, enabling users to see their work clearly, especially in tight or dimly lit spaces.

One of the most significant advantages of the BDBS100 is its lithium-ion battery technology. The 1.5Ah battery provides longer runtime and faster charging compared to traditional nickel-cadmium batteries. Users can expect approximately 18 months of battery life due to the built-in battery management system, which helps to extend the battery’s lifespan by preventing overcharging and overheating.

The screwdriver comes with an adjustable clutch that allows users to select the appropriate torque setting for various applications, minimizing the risk of stripping screws or damaging work materials. Additionally, the BDBS100 includes a magnetic bit holder that keeps bits securely in place, preventing them from falling or getting lost during use.

With its combination of performance, portability, and advanced features, the Black & Decker BDBS100 is an excellent addition to any tool collection. Whether you are assembling furniture, performing home repairs, or tackling other tasks, this cordless screwdriver provides the power and convenience needed to complete projects efficiently and effectively. Its thoughtful design and robust capabilities make it a reliable choice for a wide range of users seeking a dependable tool.
Top Page Image Contents