Operating: Power Unit

Trigger Switch & forward/Reverse slider

The forward/reverse slider (7) is used to control the direction the chuck (12) spins - foward to drive screws, reverse to remove screws. It is located above the variable speed trigger (8). To reverse the motor, release the trigger FIRST, then push the slider to the right hand side of the tool when viewing from the rear. After any reversing operations, return lever to the forward position. Never change the direction of rotation while the motor is running.

• The Power Unit is turned ON and OFF by pulling and releasing the trigger. The farther the trigger is depressed, the higher the speed of the Power Unit.

• A forward/reverse control slider determines the direction of the tool.

• To select forward rotation, release the trigger switch and depress the forward/reverse control button to the left.

• To select reverse, depress the forward/reverse control button to the right.

NOTE: When changing the position of the control button, be sure the trigger is released.

Installing and removing attachments - Figure G

G

WARNING: Shock hazard. Under no circumstances should

 

this product be used near water.

 

WARNING: Burn hazard. Moving parts within the Power

 

Unit become hot during use. Avoid contact with moving parts

 

within Power Unit when removing and installing accessories.

 

WARNING: Before assembly, lock the Power Unit by

 

setting the forward/reverse slider (7) to the center position and

 

remove the battery from the Power Unit. Remove any accessory

 

from the attachment before removing or installing the attachment.

 

WARNING: To reduce the risk of injury, do not place fingers or other objects inside the Power Unit, other than the attachments designed to work with the Power Unit.

•Lock the Power Unit by setting the forward/reverse slider (7) to the center position.

•To remove an attachment, depress the release button (9) and take the attachment off the tool.

•To fit an attachment, line it up with the tool as shown and push it onto the Power Unit until it snaps into place and an audible click is heard.

•Ensure attachment is securely attached by gently pulling it away from the Power Unit.

NOTE: Only use attachments that are specifically designed for and compatible with the Power Unit.

NOTE: Refer to individual attachment instruction manuals for specific safety warnings and operating instructions before operating attachments with the Power Unit.

Operating: Drill/Screwdriver attachment

Safety Warnings and Instructions: Drills

1. Hold drill firmly with one hand on the grip and the other hand on the bottom of the battery pack unless an auxillary handle has been supplied with the tool. Use auxillary handle if supplied with the tool.

2. When attaching accessories in the drill chuck, hand tighten the keyless chuck firmly.

WARNING: Drill may stall (if overloaded or improperly used) causing a twist. Always expect the stall. Grip the drill firmly with both hands to control the twisting action and prevent loss of control which could cause personal injury. If a stall does occur, release the trigger immediately and determine the reason for the stall before re-starting.

WARNING: Let the tool work at its own pace. Do not overload.

WARNING: Before drilling into walls, floors or ceilings, check for the location of wiring and pipes.

Fitting and removing a drill bit or screwdriver bit

The drill/screwdriver attachment (11) is fitted with a keyless chuck (12) to allow for an easy exchange of bits.

• Lock the tool by setting the forward/reverse slider (7) to the center position.

• Open the chuck by turning the front part clockwise with one hand while holding the rear part with the other.

10

Page 9 Page 11
Page 10
Image 10
Black & Decker BDCDMT1206KITS instruction manual Operating Power Unit, Operating Drill/Screwdriver attachment
Page 9 Page 11

BDCDMT1206KITS specifications

The Black & Decker BDCDMT1206KITS is a versatile and powerful tool kit that caters to both DIY enthusiasts and professionals alike. Designed for efficiency and ease of use, this kit includes a range of features and technologies that make it a standout choice in the market.

One of the main features of the BDCDMT1206KITS is its innovative Matrix Quick Connect System. This system allows users to easily swap out attachments for various tasks, making the tool incredibly adaptable. The kit comes with multiple attachments, including a drill, sander, and jigsaw, enabling users to tackle a wide range of projects without the need for multiple standalone tools.

The BDCDMT1206KITS is powered by a robust 20V MAX lithium-ion battery, which provides ample power and longevity. This battery technology ensures that you won’t be interrupted mid-project due to power failure. Additionally, the lithium-ion battery has a long shelf life and retains its charge for extended periods, making it convenient for the user. The included charger is designed to quickly recharge the battery, reducing downtime and keeping projects on track.

Comfort and usability are also key characteristics of the Black & Decker BDCDMT1206KITS. The tool features an ergonomic design that minimizes user fatigue during extended use. The lightweight construction makes the tools easy to handle, ensuring precision and control for all types of applications. The easy-to-use controls and intuitive design allow even novice users to quickly get accustomed to the tools.

The kit also includes safety features designed to protect the user during operation. Safety guards and ergonomic grips ensure that users can work confidently while minimizing the risk of accidents.

In addition to its technical specifications, the BDCDMT1206KITS is backed by Black & Decker’s reputation for quality and durability. This tool kit is well-constructed and designed to withstand the rigors of ongoing use.

Overall, the Black & Decker BDCDMT1206KITS is a comprehensive and user-friendly tool kit that combines power, versatility, and safety. It is an excellent investment for anyone looking to expand their toolkit and take on a variety of projects around the home or in a professional setting. With its innovative features and reliable performance, the BDCDMT1206KITS is sure to meet the needs of any user.
Top Page Image Contents