Black & Decker BDH9600CHV WARNINg:

The product can be attached to a wall to provide a convenient

storage and charging point for the appliance. When mounting

to a wall, make sure the mounting method is suitable for the

wall type and is appropriate to the weight of the appliance.

• Mark the location of the charger (5) screw holes on the wall

(within reach of an electrical outlet for charging the vacuum

while it is on the wall bracket).

• Fix the mounting bracket to the wall using appropriate screws

and plugs for the type of wall, and weight of the appliance.

• Hang the appliance by placing the opening of the vacuum

base over the hooks in the wall mount charging bracket.

Model BDH9600CHV is supplied with some of the following

accessories:

• A brush tool (8) for furniture and stairs.

• A crevice tool (9) for conned spaces.

• Insert the appropriate accessory into the front of the

appliance as show in figure B.

• Make sure the accessory is fully pushed in.

• Before rst use, the battery must be charged for at least 24 hours.

• Place the appliance on the charging bracket whenever it is not in use.

WARNINg: Before charging, be sure to empty all contents and dry thoroughly if

needed to avoid damage to your appliance.

• Make sure the appliance is switched off. The battery will not be charged when the on/

off switch (1) is in the on position.

• Place the appliance on the charging bracket (5).

• Plug in the charger.

• Leave the appliance to charge for at least 21 hours.

While charging, the charger may become warm. This is normal and does not indicate a

problem. The appliance can be left connected to the charger indenitely.

WARNINg: Do not charge the battery at ambient temperatures below 50 °F or

above 104 °F.

• To switch the appliance on, slide the on/off switch (1)

forward to position 1.

• To switch the appliance off, slide the on/off switch (1) back

to position 0.

• For everyday spills of dry material.

• Do not ll the dust bowl (3) beyond the end of the intake

chute.

In order to keep the suction force optimised, the lters must be cleared regularly during use.