Please Read and Save this Use and Care Book.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
❍ Read all instructions. |
❍ To protect against risk of electrical shock do not immerse cord, |
plugs or appliance in water or other liquid. |
❍ Close supervision is necessary when any appliance is used by or |
near children. |
❍ Unplug from outlet when not in use, before putting on or taking off |
parts, and before cleaning. |
❍ Avoid contacting moving parts. |
❍ Do not operate any appliance with a damaged cord or plug or |
after the appliance malfunctions, or is dropped or damaged in any |
manner. Return appliance to the nearest authorized service facility |
or call the appropriate |
for examination, repair or electrical or mechanical adjustment. Or, |
call the appropriate |
❍ The use of attachments, including canning jars, not recommended |
by the manufacturer may cause fire, electric shock or injury. |
❍ Do not use outdoors. |
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
Warning: This appliance is equipped with a
ELECTRICAL CORD
a) A short | |
provided to reduce the risk resulting from becoming entangled in or | |
tripping over a longer cord. | |
b) Longer detachable | |
available and may be used if care is exercised in their use. | |
c) If a long detachable | |
1) | The marked electrical rating of the detachable |
| or extension cord should be at least as great as the electrical |
| rating of the appliance, |
2) | If the appliance is of the grounded type, the extension cord should |
| be a |
3) | The longer cord should be arranged so that it will not drape over |
Product may vary slightly from what is illustrated.
How to Use
This product is for household use only.
The unit has a motor overheating protection system that automatically shuts off the motor to protect it from overheating. Wait 5 minutes for unit to cool down. Unplug the unit then plug again to resume operation.
BLENDER JAR ASSEMBLY
1.Before first use, wash all parts except the unit base. Put‑the gasket on top of the blade assembly.
2. | Place the blade assembly into the jar base and turn |
| the jar base clockwise until tight (A). |
3. | Interlock System: Place the assembled jar onto the |
| unit base and turn toward lock ( ) until secured in |
| place. You’ve engaged the interlock system if you lift |
A | the jar handle and the entire blender lifts together as |
| one unit. |
For 220V units only: If the jar is not installed properly, the unit will not function.
USING YOUR BLENDER
1.Be sure the unit is “OFF” and plug the cord into a standard electrical outlet.
2.Place the food to be blended into the jar and the lid on the jar before blending.
3.Be sure that the lid cap is in place. When crushing ice or hard foods, keep one hand on the lid.
❍ Do not let cord hang over edge of table or counter. |
❍ Keep hands and utensils out of container while blending to reduce |
the risk of severe injury to persons or damage to the blender. A |
scraper may be used, but must be used only when the blender is |
not running. |
❍ Blades are sharp. Handle carefully. |
❍ To reduce the risk of injury, never place |
base without jar properly attached. |
❍ Always operate blender with cover in place. |
❍ When blending hot liquids, remove center piece of |
the countertop or tabletop where it can be pulled on by children |
or tripped over. |
Note: If the power supply cord is damaged, it should be replaced by qualified personnel or in Latin America by an authorized service center.
1. | Lid cap |
2. | Lid |
Models:
B
Models:
4.Choose the speed that best suits your task for food or beverage blending (B). Press the LOW/HI button in combination with the task button when choosing or switching speeds.
5.Use the Pulse (P) button for a few seconds, then release for quick or delicate blending tasks. Releasing the pulse automatically turns the blender off.
SAVE THESE INSTRUCTIONS.
This product is for household use only.
3. | Jar |
4. | Handle |
5. | Gasket |
6. | Blade assembly |
7. | Jar base |
8. | Unit base |
9. | Controls (see B) |
6.If you want to add ingredients while the blender is on, remove the lid cap and drop ingredients through the lid opening.
7.When finished blending, push the Off/Pulse (O/P) button.
8.To remove the jar, grasp the handle, twist toward the unlock (
) and lift it from the unit base. Remove the lid before pouring.
BLENDING TIPS AND TECHNIQUES
•Cut food into small pieces about ¾” (2 cm) before adding to the blender.
•When ingredients stick or spatter along the sides of the jar, stop the blending action and remove the lid. Use a rubber spatula to push food toward the blades. Replace the lid, then continue blending.
• | Some of the tasks that cannot be performed efficiently with a blender |
| are: beating egg whites, whipping cream, mashing potatoes, grinding |
| meats, mixing dough, and extracting juices from fruits and vegetables. |
• | The following items should never be placed in the unit as they may |
| cause damage: dried spices and herbs (ground alone), bones, large |
NEED HELP?
For service, repair or any questions regarding your appliance, call the appropriate 800 number on cover of this book. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to manufacturer, nor bring it to a service center. You may also want to consult
Póliza de Garantía (Válida sólo para México)
Duración
Applica Manufacturing, S. de R. L. de C.V. garantiza este producto
Por favor llame al número correspondiente que aparece en la lista a continuación para solicitar que se haga efectiva la garantía y donde Ud. puede solicitar servicio, reparaciones o partes en el país donde el producto fué comprado. También puede consultarnos en el
pieces of solidly frozen foods, tough foods such as turnips. |
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service personnel.
To maintain performance, dry blades after cleaning.
FAST CLEAN
1.The "Fast Clean" feature helps make it easier to clean the blender jar by loosening food particles. You may use the "Fast Clean" feature by filling the jar half full with lukewarm water. Add a little dish detergent for tough cleaning jobs (such as after making salsa, shakes, or salad dressing). Hold the lid and press any button. Let the unit run for about 5 seconds, then press Off.
2.Unplug the unit, twist to unlock ( 
), lift the jar off the unit base, and rinse.
3.Parts may be
1.Before cleaning, turn off and unplug the blender.
2.Rinse parts immediately after blending for easier cleanup.
3.Wipe the unit base with a damp cloth and dry thoroughly. Remove stubborn spots by rubbing with a damp cloth and
Important: Do not immerse the base in liquid.
4.Removable parts can be washed by hand or in a dishwasher. Do not place jars or parts in boiling liquids.
5.If liquids spill into the base, wipe with a damp cloth and dry thoroughly. Do not use rough scouring pads or cleansers on parts
or finish.
the website listed on the cover of this manual.
(Applies only in the United States and Canada) What does it cover?
•Any defect in material or workmanship provided; however, Applica’s liability will not exceed the purchase price of product.
For how long?
•Two year(s) from the date of original purchase with proof of such purchase.
What will we do to help you?
•Provide you with a reasonably similar replacement product that is either new or factory refurbished.
How do you get service?
•Save your receipt as proof of date of sale.
•Visit the online service website at www.prodprotect.com/applica, or call
•If you need parts or accessories, please call
What does your warranty not cover?
•Damage from commercial use
•Damage from misuse, abuse or neglect
•Products that have been modified in any way
•Products used or serviced outside the country of purchase
•Glass parts and other accessory items that are packed with the unit
•Shipping and handling costs associated with the replacement of the unit
•Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)
How does state law relate to this warranty?
•This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.
por 2 años a partir de la fecha original de compra.
¿Qué cubre esta garantía?
Esta Garantía cubre cualquier defecto que presenten las piezas, componentes y la mano de obra contenidas en este producto.
Requisitos para hacer válida la garantía
Para reclamar su Garantía deberá presentar al Centro de Servicio Autorizado la póliza sellada por el establecimiento en donde adquirió el producto. Si no la tiene, podrá presentar el comprobante de compra original.
¿Donde hago válida la garantía?
Llame sin costo al teléfono 01 800 714 2503, para ubicar el Centro de Servicio Autorizado más cercano a su domicilio en donde usted podrá encontrar partes, componentes, consumibles y accesorios.
Procedimiento para hacer válida la garantía
Acuda al Centro de Servicio Autorizado con el producto con la póliza de Garantía sellada o el comprobante de compra original, ahí se reemplazará cualquier pieza o componente defectuoso sin cargo alguno para el usuario final. Esta Garantía incluye los gastos de transportación que se deriven de su cumplimiento.
Excepciones
Esta Garantía no será válida cuando el producto:
A)Se hubiese utilizado en condiciones distintas a las normales.
B)No hubiese sido operado de acuerdo con el instructivo de uso que le acompaña.
C)Cuando el producto hubiese sido alterado o reparado por personas no autorizadas por Applica Manufacturing, S. de R. L. de C.V.
Nota: Usted podra encontrar partes, componentes, consumibles y accesorios en los centros de servicios autorizados. Esta garantía incluyen los gastos de transportación que se deriven de sus cumplimiento dentro de sus red de servicio.
Argentina
SERVICIO TECNICO CENTRAL ATTENDANCE
Avda. Monroe N° 3351 Buenos Aires – Argentina Fonos: 0810 – 999 - 8999
011 - 4545 - 4700
011 – 4545 – 5574
supervision@attendance.com.ar
Chile
MASTER SERVICE SERVICENTER Nueva Los Leones N° 0252 Providencia
Santiago – Chile
Fono Servicio: (562) – 232 77 22 servicente@servicenter.cl
Colombia
PLINARES
Avenida Quito #
Costa Rica
Aplicaciones Electromecanicas, S.A.
Calle 26 Bis y Ave. 3
San Jose, Costa Rica
Tel.: (506)
Ecuador
Servicio Master de Ecuador
Av. 6 de Diciembre 9276 y los Alamos Tel. (593)
El Salvador
Calle San Antonio Abad 2936
San Salvador, El Salvador
Tel. (503)
Guatemala
MacPartes SA
3ª Calle 414 Zona 9
Frente a Tecun
Tel. (502)
Honduras
ServiTotal
México
Articulo 123 # 95 Local 109 y 112
Col. Centro, Cuauhtemoc,
México, D.F.
Tel. 01 800 714 2503
Nicaragua
ServiTotal
De semáforo de portezuelo 500 metros al sur. Managua, Nicaragua, Tel. (505)
Panamá
Servicios Técnicos CAPRI Tumbamuerto Boulevard El Dorado Panamá
500 metros al sur.
Tel.
Perú
Servicio Central Fast Service
Av. Angamos Este 2431
San Borja, Lima Perú
Tel. (511) 2251 388
Puerto Rico
Buckeye Service
Jesús P. Piñero #1013
Puerto Nuevo, SJ PR 00920
Tel.: (787)
Republica Dominicana
Plaza Lama, S.A.
Av, Duarte #94
Santo Domingo, República Dominicana Tel.: (809)
Venezuela Inversiones BDR CA Av. Casanova C.C.
City Market Nivel Plaza Local 153 Diagonal Hotel Melia, Caracas.
Tel. (582)
is a registered trademark of The Black & Decker Corporation, Towson, Maryland, USA
es una marca registrada de The Black & Decker Corporation, Towson, Maryland, E.U.
Made in People’s Republic of China
Printed in People’s Republic of China
Contigua a Telecentro
Tegucigalpa, Honduras,
Tel. (504)
servicio@applicamail.com
