ENGLISH
g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce
4) Power tool use and care
a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g)Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Service
a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Additional Safety Instructions for Blowers
•Do not collect still smoldering cigarette ashes, freshly cut metals shaving, screws, nails and the like.
•Never block suction inlet and outlet.
•Do not cross gravel paths or roads whilst your product is switched on during blow/vac mode. Walk, never run.
•Always be sure of your footing, particularly on slopes.
•Do not overreach and keep your balance at all times.
•Do not place the inlet or outlet of the vacuum near eyes or ears when operating. Never blow debris in the direction of bystanders.
•Keep all cooling air inlets clear of debris.
•To protect your feet and legs while operating the appliance, always wear heavy duty footwear and long trousers.
•Never allow children to use the appliance.
•Wear protective goggles while operating.
•If operating an appliance in a damp location is unavoidable, use a Residual Current Device (RCD) with a tripping current of not more than 30mA protected supply. Use of an RCD reduces the risk of electric shock.
•To prevent dust irritation the wearing of a face mask is recommened.
•Disconnect the appliance from the mains supply
-whenever you leave the machine;
-before cleaning a blockage;
-before checking, cleaning or working on the appliance;
-if the appliance starts to vibrate abnormally.
•Store the appliance only in a dry place.
Warning symbols
Do not use in the rain or leave outdoors while it is raining.
Always wear eye protection.
Always wear ear protection.
Keep bystanders away.
Do not touch the fan.
Switch off: Remove plug from mains before cleaning or maintenance
4
