Labels on tool

The following symbols are shown on the tool:

Warning! To reduce the risk of injury, the user must read the instruction manual.

Position of Date Barcode

The Date Code which also includes the year of manufacture, is printed into the housing.

Example:

2014 XX JN

Year of manufacturing

Electrical safety

This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black and Decker Service centre in order to avoid a hazard.

The extension cable must be suitable for outdoor use and marked accordingly. Up to 0.75 mm² H05VV-F or H05RN-F extension cable can be used without loss of product performance.

Features

This tool includes the following features:

1.Nozzle

2.Blast Port

3.Trigger Switch

4.Variable Speed Knob

5.Lock-On Button

6.Suction Port

7.Dust Bag

Assembly

Warning! Before assembly, make sure that the tool is switched off and unplug.

Use

Mounting The Nozzle For Blowing Operations (fig. A)

•Insert the pin located inside the Nozzle into the notch provided on the Blast Port (1)

•To lock Nozzle in place, turn the Nozzle in the direction indicated.

•To remove Nozzle, turn the Nozzle in the opposite direction.

Mounting The Nozzle And Dust For DustCollection (fig. B)

•For dust collection, mount the Dust Bag at the Blast Port

(2)and Nozzle at the Suction Port (6)

ENGLISH

•To remove Dust Bag and Nozzle, simply pull out by first turning in the opposite direction.

•Empty the Dust Bag frequently to ensure maximum dust collecting efficiency.

Operating The Blower (fig. C)

•To switch your Blower on, depress the Switch (3). To stop your Blower, release Switch.

•Adjust Variable Speed Knob (4) for different speed requirement.

•When continuous operation is required, first depress the switch and then the lock-on button (5) and release to disengage lock, squeeze and release switch.

Warning: Continuous running of machine should not exceed 30 minutes.

Replacing Carbon Brushes (fig. D)

•Use a screwdriver to remove the brush holder cap.

•Take out the worn carbon brush, insert the new one and secure the brush hold cap.

Warning! Remove and check the carbon brushes regularly. zReplace when they wear down to the limit mark.

Accessories

The performance of your tool depends on the accessory used. Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your tool.

Maintenance

Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and unplug the tool.

•Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.

•Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Technical data

 

 

BPPT600

Voltage

V

220 - 240

 

 

 

Frequency

Hz

50/60

 

 

 

Power

W

600

No-load speed

/min

0-16,000

 

 

 

Air Volume

m3/min

3.5

Weight

Kg

1.6

5

Page 4 Page 6
Page 5
Image 5
Black & Decker BPPT600 Labels on tool, Position of Date Barcode, Electrical safety, Features, Assembly Use, Accessories
Page 4 Page 6

BPPT600 specifications

The Black & Decker BPPT600 is an innovative yard tool designed for outdoor enthusiasts and homeowners seeking efficiency and effectiveness in lawn maintenance. This electric leaf blower, known for its power and versatility, provides a convenient solution for managing leaves, debris, and grass clippings with minimum effort.

One of the standout features of the BPPT600 is its lightweight design. Weighing in at just around 6.5 pounds, it allows users to maneuver the blower easily, ensuring less fatigue during extended use. This is particularly beneficial for those with larger properties or for those who need to clear substantial amounts of debris regularly.

Powering the BPPT600 is a robust 12-amp motor that delivers impressive air speed and volume. This powerful motor enables the blower to achieve air speeds up to 180 miles per hour, making it highly effective for blowing leaves, twigs, and other yard waste into manageable piles. This electric model eliminates the need for gas, making it more environmentally friendly and reducing the hassle of oil and fuel mixtures.

The BPPT600 features a versatile design, allowing for both blowing and vacuuming capabilities. With the simple flip of a switch, users can transition from blowing debris to vacuuming it. This dual functionality enhances the tool's utility, providing a comprehensive solution for yard maintenance. Furthermore, when in vacuum mode, the debris is mulched down to reduce its volume by up to 10:1, providing an efficient way to compost or dispose of yard waste.

Another notable characteristic of the Black & Decker BPPT600 is its built-in cord retention system. This feature ensures that the power cord remains securely connected during use, which prevents interruptions and enhances safety. The design also minimizes the risk of tangles, allowing for uninterrupted operation.

The leaf blower is equipped with a comfortable grip and an ergonomic handle, making it user-friendly for extended periods. With easy-to-access controls, users can operate the blower with maximum efficiency.

In conclusion, the Black & Decker BPPT600 stands out as a reliable and efficient tool for lawn care. With its powerful motor, dual functionality, lightweight design, and ease of use, homeowners can tackle their yard work effectively, ensuring a clean and tidy outdoor space throughout the year. Whether for occasional yard tasks or regular maintenance, this blower meets the needs of various users, making it a valuable addition to any toolkit.
Top Page Image Contents