Useful advice, Maintenance & cleaning, Technical data

ENGLISH

*The mincer should only be used for very hard cheeses such as parmesan.

Note: The mincer should not be continuously run for longer than 40 seconds.

Useful advice

Note: Do not exceed the maximum capacity of 1.5 litres.

•When blending is complete return the control knob to the off (0) position.

•Once the blade has come to a complete stop, lift the jug (D) from the blender body (I).

•Remove the lid (B) and pour the ingredients into a suitable container.

•Liquids can be poured through the pouring spout (C) by lifting the spout cover.

Note: Ingredients can be added by inserting them through the hole left when the ﬁller cap (A) is removed.

Warning! Never operate the Blender without the lid (B) ﬁtted.

Warning! Do not use any of the accessories with out the required seal.

•Switch the appliance off, remove the plug from the wall socket and wait until the blade has stopped rotating.

•The appliance is easier to clean if you do so immediately after use.

•Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance.

•All detachable parts are dishwasher-safe.

•Place the detachable plastic parts on the top tray of the dishwasher. Make sure they are placed well away from the heating element.

•All removable parts can be cleaned with a cleaning brush in warm water with some washing-up liquid and rinse them under the tap.

•Remove the dirty parts from the motor unit.

Clean the motor unit with a damp cloth.

•Never immerse the motor unit in water nor rinse it under the tap.